Why are shark vacuum hard to push? - Shark Vacuums

I had a shark vacuum as well the only thing i can tell you is do not put it on the lowest setting for carpet pile height. My shark also had lost a screws on the bottom so when i did adjust for height it didn't move the adjustment properly or yours could be broken. Put it on its side and turn adjuster to see if it moves properly and don't use bare floor selection for carpet easy to mistake that selection when we are in a hurry and turn that dial one click too far. I still do it on my Eureka Vacuum.
Hope this helps you
Cathy

contact shark,they are all bad

William,
I hate to be the bearer of bad news, but getting parts for Shark vacuums is Very hard! I work at a vacuum repair shop and we cannot get even simple things like belts for Shark vacuums and we will work on anything that we can get parts for. Sorry!

Does it have a "brushes" lowering/higher switch?
Normally due to brushes being too low in particular on deep pile carpets??
check the actual fixings for the rotating brushes are ok and the brush not simply need "clicking" back into place?

Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101
;

; ';';

Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101


;kj

Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

w

Hi,
There is no motor the steam pressure pushes it...

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

Hi,
Push and pull the handle like your mopping...


Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

Hi,
Hopefully you are still in the one year warranty...

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101