My Panasonic NA 148 VA2. Does not tumble instead in keeps spinning in the tumble cycle empties a bit of water (or so it sounds) then spins until it stops and shows 13". The hard spin is not there

SOURCE: washing machine

Please check if the drain solenoid is functioning. This may caused the problem.


chris

SOURCE: Maytag Washing Machine Stops after wash cycle...

sounds as if you have abad contact in the timer
advance the timer to a different spin cycle and see if it spins
then bo back to where it stops
if it will spin in the other spin cycles but not where it stops the the timer will need to be changed

SOURCE: Whirlpool Model LSV6234AWO

door switch bad?

Mike Price

• 744 Answers
• Posted on Jun 23, 2009

SOURCE: Loud clacking sound from the washing machine as spin cycle starts

Yes you either have a whirlpool or kenmore...since you didnt mention the make I guessed :) It sounds like you have a bad coupling, have included a link giving you instructions for replacing the coupling and a link where you can buy the coupling.

http://www.thisoldappliance.com/howto/Motor_Coupling.htm

p.s you don't actually have to remove the cabinet, the motor, pump and coupling can be accessed by tilting the machine back and wedging something under it so it does not fall on you while your working on it.

you can purchase the part from:

http://www.appliancepartspros.com/part_details.aspx?part_id=3963893

Hope this helps.

SOURCE: washing machine won't spin and drain

the drain pump is not working,after wash cycle the washer should drain the used water,if it does not function-all the next cycle will not commence.