Looking for telmann upright freezer handle for model hs 241fn

order seal and dont take door off do not need to

You resolve the issue by first finding out the significance of the code and then dealing with it. Go to mfg website for code.

Good Afternoon Friend,

I understand that you are looking for the temperature control knob on your Frigidaire freezer, model# FFU2064DW. The temperature control is located inside your freezer on upright models, and on the left outside wall on chest models. The temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. Hope this is helpful.

-Best Regards-
WP

Midea Customer Service 866/646-4332
I bought my freezer in 2014 and this number is from the instruction manual

searspartdirect.com you need the model # to order it

http://www.frigidaire.com/manuals
go to this web site. It has lots of manuals. I found several for your unit. just enter you model number and it shows up with several choices.
Hope this is what you are looking for.

http://www.managemylife.com/mmh/owner_manuals/370/KENMORE-Upright-Freezer-L0805601?brand_name_search=Kenmore+freezer+2532846.2801
try this web site that has a copy of a manual for this freezer. See if this has what you are looking for.

If you have the model number you posted under, you are looking at replacing the evaporator fan motor, which would be a part number 4309014 for that Maytag MQU1556A. It is located inside the freezer, behind the lower back wall.

is it possible the door has not been closed at some point?
If so they can build up with ice in the evaporator which the defrost system cannot handle....Try a manual defrost.
Depending on where the unit is installed high ambient temperature can drop the internal temp enough to set the alarm off though they will still freeze sufficiently