You will get all the information on Toolbox from here https://toolboxwidget.com. Download your PDF copy today or email us to [email protected] for ordering book.
SOURCE: hood release will not release hood cable is not broken
the outer cable may have come loose near the lock, if the grille screws are accessable remove the grille and you will have access to the underside of the lock, you may need a screwdriver to push the lock lever aside to unlock the bonnet
SOURCE: Hood release cable isn't connected to interior hood release lever
Your going to have to use vice grips or pliers. Just pull hard till you hear the hood pop open or have a friend push down on the hood so you can pull in the hood cable easier to unlock the hood latch. Good luck and keep me posted.
SOURCE: 2000 Chevrolet Blazer The hood release
Grab the cable stub with a pair of vise grips, have someone bounce the front of the hood while pulling...most times that will free a balky latch. Then you can change the cable.
SOURCE: Stuck hood latch on 1996 chrysler concorde- Possible broken cable
take off the left front wheel and fender well. slice off the hood cable insulation get a hook too pull the wire have a buddy pull up on the hood while doing this. Should pop open then hope this helps u out.
SOURCE: I have a 1989 Reliant K and my emergency break
Surprized you still have a K car running!
To fix this you'd have to get under the car and cut the cable going to the rear brakes.
I know, you don't want to do that.
It's the easiest solution.
I automatic doesn"t need a parking brake.
351 views
Usually answered in minutes!
×