After cleaning(cleaned blades) my Ionic pro turbo, (alcohol and t-shirt cloth)....and pushing cleaner up and down.I turn it on and the red light goes on It won't turn on ..What to do?

Hi deadeyedick7,

I work for the Ionic Pro company. Please call customer service at 800-875-8577 and they will be happy to assist you. Thank you, Mary

Hi ken otte,

I work for the Ionic Pro company. Please call customer service at 800-875-8577 and they will be happy to assist you. Thank you, Mary

Hi weaveracer,

I work for the Ionic Pro company. Please call customer service at 800-875-8577 and they will be happy to assist you. Thank you, Mary

Hi Slipdope... make sure that you are also cleaning the ionizing wire. The wire cleaning mechanism is on top. Just pull up the tab and pull the cleaner up and down to clean the wire. If that doesn't work, call customer service at 800-875-8577 and they can do some trouble shooting with you and replace the unit for you if need be. Thank you.

After cleaning the unit, blue light turns on momentarily then red cleaning light comes back on. Have cleaned and dried unit including the contacts on the end (cleaned with alcohol). Sounds like a common problem, any solution?
Bob

i have the same problem after cleaning it it turned on with a sound like frying stuff .and it goes to red light which means clean..but the blades are clean i dont know whats goin on but theres a smell in the unit which i cant tell what kind any one can help?

Does anyone in your house smoke? Could be from cigarettes. I was told by the Ionic Pro Company to clean the blades with rubbing alcohol.

I found that the buzzing can be removed by blowing out the unit, cleaning the blades and taking a long cotton swab and alcohol to thoroughly clean the corona wire - carefully - don't break it. The wire should be clean enough that the slider/wiper runs smoothly up and down the wire after cleaning. If it drags or is rough to slide, you will still have noise no matter how many times you clean the blades. The wire gets a "crust" on it.