My Samsung aquajet washer is flashing an erro code of 3E2 what error is this.model #WAA456DRHDSU/AA

It is SAB not SA6. You are in Jewish Sabbath Mode.

• SOLVED: Clock now shows an SA6 error code

  https://www.fixya.com > support > t263799-clock_no...
  1 answer
  Press and hold the clock button for 5 seconds. The code will flash, let go and it is reset. Read full answer. May 04, 2008 • Maytag Kitchen Ranges.

What is the meaning of the error codes displayed on your ...

Samsung https://www.samsung.com > ... > Home Appliance
Dec 21, 2022 - These error codes appear when the range is in demo mode. The oven and cooktop will not heat (gas cooktops will still ignite). See your user ...

Samsung model #NX58H5600SS/AA error code SA6. ...

JustAnswer https://www.justanswer.com > Appliance Repair
Oct 31, 2019 - Samsung model #NX58H5600SS/AA error code SA6. Approximately 4 yrs old. About 3 yrs but now the range and none of - Answered by a verified ...
1 answer · Top answer: All you have to do is accept the answer. There should be stars in the top left or right corner ...

• 
  

  I have a code on display "SA6" and oven won't work.... What

  https://www.justanswer.com > Appliance Repair
  Jan 30, 2021 · 1 answer
  Your oven is in Sabbath mode. What is the brand and model number please so I can provide the solution?

error code 5a6 or sab

Appliance Video https://www.appliancevideo.com > question > error-co...
If the range is displaying "SAb", it is in Sabbath mode. The oven, as a safety feature, will automatically turn itself off after 12 hours. Sabbath mode ...

Have you Google for a manual yet? You should of before removing the sensor!

Your laundry load is unbalanced. Re-distribute your clothes so it will spin again.

If your washing machine malfunctions, you may see an information code on the display.
Please see below for possible solutions for each information code. If you have tried all of these and are still experiencing problems, you may need to contact the Samsung Service Centre to arrange an engineer visit.
CODE: 1E, E7, 1C (Water level sensor)
Action:
Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program. If the information code remains, contact the Samsung Service Centre.
CODE: 3E, 3E1, 3E2, 3E3, 3E4, bE, 3C (Motor) Action:
Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program. If the information code remains, contact the Samsung Service Centre.

link to how to fix


http://www.appliancepartspros.com/diy-story-samsung-wa456-error-code-dc-balance-spin-diy1142886.html

If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Only the front loaders have shipping bolts usually.

My Samsung Aquajet Washer has a DC error and when I pause it and start it again,the time keeps going up and doesn't stop. I don't know what to do!! Please Help

You csn find information on that Samsung washer error code here https://appliancerepairinfo.com/samsung-washer-error-codes/

HE Top Load Washers
Models:
F1 Error Code
WTW6200S WTW6300S WTW6400S WTW6600S WTW6700T
MTW6300T MTW6400T MTW6500T MTW6600T MTW6700T
Serial Numbers: CT01 - CU52
There are four areas of concern that can cause the F1 Error Code. Each area must be sequentially addressed to ensure
that the diagnosis is correct and the proper repair is completed.
A) Air leaks in the air pressure (switch/sensor) hose.
a. Inspect the hose for cracks, pin-holes or loose connection.
b. Replace the hose and harness assembly (W10058730) if it is compromised.
B) Moisture in the air pressure (switch/sensor) hose.
a. Inspect the hose for evidence of water.
b. Replace the hose and harness assembly (W10058730) if water is detected.
C) Lint or flashing in the air dome hose connection port.
a. Inspect the air dome hose connection port for lint or flashing.
b. Use a small round device (small screwdriver) to ensure that there is nothing blocking the air dome outlet on
the tub.
D) The control needs to be replaced.
a. Replace the control only after you have completed steps A - C above, and verified that there are no issues
with the air pressure system.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.