What is an error code c2517 on a Bizhub c253.cant find it in the manual.

Konica Minolta Error Codes and Solutions

• 210 Answers
• Posted on Aug 23, 2009

SOURCE: howto fix internal error c - 1183 on bizhub c253

C-1183 - Finishing option elevator drive malfunction

SOURCE: I have a BizHub C253 and the data light just

most common cause for this is the hard drive in the copier is malfunctioning and needs to be replaced or data clear needs to be done in service mode

SOURCE: Bizhub C253: Error Code C-4551 will not clear.

open front door and switch-off machine
press utility buton hold press-on then swietch-on machine, on the screen right top corner u see dot (remove finger from utility buton)
after fue second u will see trouble reset touch under u will see ok switch-off machine wait 10 sec and switch on

If the error code still is on the machine u have to change cyan laser

SOURCE: How do I clear error message C-2558 for the Konica

tis error means abnormal tonder density in the balck image unit take the blacke image unit out and shake it while holding it level and put it back in the machine to reset the error code leave the machine on and open then close the front door

Ben

• 108 Answers
• Posted on May 19, 2010

SOURCE: how to clear error code c 3421 on konica bizhub

C-3421 = Fusing heaters trouble
To Reset:
1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.

If error code returns a technician is needed to replace fuser section. Call local dealer with error code and tell them to make sure a tech brings a fuser assembly.