Where is fuse for suzuki generator se500a - Electrical Supplies

SV1400 SV1800 SV2200 Suzuki Generator Service Manual

https://www.repairmanual.com > product > official-sv1...

This Official SV1400 SV1800 SV2200 Suzuki Generator Service Manual provides detailed service information, step-by-step repair instruction and maintenance ...
US$29.95 · ‎In stock

and

Suzuki SE1800A Generator - My Tractor Forum https://www.mytractorforum.com > ... > Generators
Sep 6, 2020 - Seems that parts for it are non-existent though. I haven't been able to find a manual for it either. First thing is to see if it at least ...

It seems it is Chinese with a Suzuki badge on it.

https://www.google.com/search?q=carburetor+for+a+Suzuki+ES4000+generator

..

Hi.

Click on the link below. The manual is for a SE700A but should be just about the same. (all the links are at the bottom of the page in the main link)

http://searchfrininus.iownyour.biz/426.htm


Good luck and kind regards.

Where can I find Manual for Suzuki SV 7500 generator?

you neer said what part you want and with it fits to.
generator and filter?
and suzuki sells them. is this a car? or a Power generator , this is a car forum.

1. Park vehicle on level ground.
2. Remove battery from vehicle.
3. Remove air cleaner outlet hose, engine under cover ( right side ) and exhaust pipe # 2 .
4. Disconnect " B " terminal wire and coupler from the Alternator ( Generator ) .
5. remove Alternator ( Generator ) belt.
6. Remove Alternator ( Generator ) cover.
7. Remove Alternator ( Generator ) bracket mounting bolts.
8. Remove Alternator ( Generator ).
Installation : Reverse dismounting procedure.
Replace Seal Ring between exhaust pipe # 1 and exhaust pipe # 2.
Torque exhaust bolts to : 43 N-m ( 4.3 kg-m,31.5 lb-ft )
Replace cable straps / defective parts as necessary.
Reinstall battery.

if the clips which hold the fuse are loose a high restistance is created and heat in generated,,is the starter moater spinning okay if not might be drawing excesive current and fuse cant take it look along those paths check main bat leads are tight

Sounds like a short in the generator rotor magnet windings its ok until it heats up and expands then your short happens.
Hope this helps