Frigidaire Washer Model FAHE4044MWO We need to find out what is making the the loud whirring in spin cycles? My husband says it sound like a bearing going bad. But I cannot find a part for a bearing.

SOURCE: Frigidaire top-load washer Loud noise during spin

its either the upper spin bearing or lower spin bearing. the upper can be replaced by itself but the lower requires the transmission the be replaced

SOURCE: Very loud on spin cycle

yes ..bearing on upper side of gearcase has gone bad probably from a water leak from tub seal

SOURCE: My model #gltr1670aso makes loud noises during spin cycle

Usually this is due to either the drum support breaking or the back bearing being bad-neither easy to fix- or worth it. Try lifting the drum up and down, if it moves up and down they are bad. I see this a lot, and the price of repair isn't worth it. Craig

SOURCE: frigidaire washer model #fwt425rhso

This is the second time I have had to replace the drum/support shaft on this washer. Not only is it expensive, but very difficult to replace. Probably the very worst washer on the market for this reason. And I only do 3-4 light loads of laundry per week. A definate design flaw on the part of the manufacturer.

SOURCE: My neptune washer is making a loud noise when in

unfortunately yes,
your main seal on the oter tub is drying out, and will continue to get louder until either the motor control fries due to resistance or it just seizes up
it can be reapired but you will need an new outer tub 500.00 spinner assembly 200.00 i could talk you through the reapir,, it really it that easy, but
for 700.00 you could easily replace the machine for brand new

i tell you this at the risk of a bad rating beacuse i bear bad new,, but i wanted to be as honest as possible to allow you an informed decision before you proceeded