Dishwashers Logo

Related Topics:

Cedric Mullins Posted on Feb 18, 2019

My samsung dishwasher trips breaker - Samsung Dishwashers

4 Related Answers

Anonymous

  • 1 Answer
  • Posted on Dec 09, 2009

SOURCE: Dishwasher tripped our main circuit breaker.

It may be that your water pump is leaking on to the motor...

Ad

Anonymous

  • 189 Answers
  • Posted on Mar 12, 2010

SOURCE: MY DISHWASHER TRIPPED THE BREAKER AND WILL NOT COME BACK ON.

Hello- This series MDB7130 is involved in a recall. Check Maytag website for details. If affected, they will offer 75$ toward a new maytag.... or a free service call to 'retrofit' a new wiring harness. These units have caused a number of  fires so disconnect power until issue is resolved.- Let me know if this info helps. Thanks- Ed

Anonymous

  • 6 Answers
  • Posted on May 13, 2012

SOURCE: Kitchenaid Dishwasher trips the 60-amp main breaker but not 20-amp.

Its possible that there may be load on that circuit from other appliances. Had an issue myself with stove and laptop on same circuit.
Check other appliance attached to the 60amp circuit (microwave, stove, kettle etc)

ercupa190

ernesto cuadra

  • 12223 Answers
  • Posted on May 15, 2012

SOURCE: dishwasher tripping breaker

1) You have some big Short circuit, can be the switch, some live wire touching the groun, the motor etc., see the diagram and use the DVOM.
God bless you

5_15_2012_4_01_23_pm.gif5_15_2012_4_01_53_pm.gif

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Dishwasher breaker trips when appliance is off

Check your circuit for a fault.
Domestic appliances have a capacitive RF filter in the mains input. Switch both live and neutral off with a double pole switch at the consumer unit when you are away. That will stop the residual current trip breaking when the neutral line is still connected.
Sep 05, 2021 • Dishwashers
0helpful
1answer

LE ERROR CODE ON MY SAMSUNG DMR78AHS DISHWASHER

this issue relates to a temporary power failure (EG: storm knocking out the power or that a breaker has tripped) this can be fixed by pressing the power key on the dish washer and the error code should clear if not contact samsung for a replacement control board
0helpful
1answer

Unit quit in the middle of a cycle and won't power up, totally dead. Is there a suspect noise filter or fuse I should begin looking for?

Make sure your circuit breaker in the main breaker box has not tripped, or "poped". It will be one a little out of place and a bit loose if it has tripped. Turn it off and back on to reset. If it tripps immediately, you have a short somewhere, possibly in the dishwasher, so you will need an electrician and or Appliance tec. to find and fix.
0helpful
1answer

My dishwasher was in the middle of a cycle and it just quit. The buttons dont light up. It doesn't turn on at all. What could be wrong with it?

Sonya, have you checked the circuit breaker in your home's circuit breaker panel to see it has been tripped? Also, is the dishwasher door tightly shut? If the breaker is tripped, reset it to see if the dishwasher trips it again. If it does, either breaker is faulty or the dishwasher has a short circuit in the electrical circuitry. You'll need an authorized service person for that.
2helpful
1answer

Dishwasher tripped our main circuit breaker.

It may be that your water pump is leaking on to the motor...
0helpful
1answer

Dishwasher pops the circuit breaker

Hi,

Here is a tip that I wrote that will help you ti find out why the circuitbreaker is tripping.

Circuit Breaker Keeps Tripping
heatman101
0helpful
1answer

Dishwasher is "tripping" the breaker & not draining.

I had the same problem with a Hobart AM8 passthru dishwasher. The electrician determined that some of the wires had become exposed and were wet, thus shorting things out and tripping the breaker.
0helpful
1answer

Circuit breaker trips when dishwasher is off.

the problem will be in the circuit to the door
opening the door and it trips the breaker indicates that the hinge is rubbing on a wire or making the harness move to ground out
7helpful
1answer

Dishwasher tripping the circuit breaker

Andy, leave the breaker off and remove the toe panel (bottom panel) from the dishwasher. Remove the cover of the junction box where the cord connection or wiring is made. Look at the wire caps and see if they are not burnt. Sometimes these connections become loose and arch, tripping the breaker. If so, cut the wires, strip a new end and reconnect. Catriver...post back.
Not finding what you are looking for?

1,601 views

Ask a Question

Usually answered in minutes!

Top Samsung Dishwashers Experts

vince

Level 3 Expert

2530 Answers

Daniel Blask
Daniel Blask

Level 2 Expert

232 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...