Ovens Logo

Related Topics:

Rick Broussard Posted on Jan 21, 2019

My KitchenAid KEBS177 Electric Single Oven only heats up properly on convection mode. Do I need to replace an element?

It's about 5 years old. In standard Bake mode the temp never gets very hot, the display reads preheating and 319 degrees (doesn't seem that hot, though) and it never fully preheats or changes temps after that.

3 Related Answers

Anonymous

  • 3 Answers
  • Posted on Dec 30, 2007

SOURCE: Amana Convection oven not controlling temp

I have just checked the baking guide in the manual and have found that it may not be us after all. (Maybe this is why they telll us to read the whole manual. Well, I never have) According to the cooking time for Baking, the range is very extensive. For example, an angel cake at 350 could take from 28-50 minutes, buscuits at 375-400 could take 8-16 minutes, layer cakes at 350-375 could take 25-40 minutes, pound cakes at 325-350 could take 45-70 minutes and fresh pies at 400-450 could take 35-60 minutes. Basically, the baking directions on the box means absolutely nothing to use Amana oven owners. We have no choice but to cook our food or baked goods until they are cooked, whenever that may be. :) Linda

Ad

Anonymous

  • 3361 Answers
  • Posted on Jul 21, 2009

SOURCE: Kitchenaid Superba electric convection oven not preheating right

Your temperature sensor is failing. Replace the temp sensor.

Sal De

  • 2699 Answers
  • Posted on Sep 04, 2010

SOURCE: I have a KitchenAid double oven with convection on

it will either be the sensor or the board,hopefully it's not the board,the part number for the sensor is 4455636 and subs to w10131825,the sensor is around 100 bucks,there should be a tech sheet on the machine most likely behind the touch pad on the top,it will tell you how to check the sensor with a meter,just unplug the sensor and read it out i think it's around 1100 ohms but check that on the tech sheet,if it's not the sensor most likely it will be the board part number 4453661 and that's around 300 buckseverything runs through this computer board but the sensor tells it how hot it is in the oven hopefully you have a bad sensor.let me know what you find,you'll most likely have to pull the oven to repair it but maybe just enough to get the top open,good luck

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

KitchenAidKEBS107: NO HEAT after power failure during self clean

Thermostat on the back needs replacement. The problem is caused by overheating the oven. Improper installation or inadequate blower. Depending on the model, the oven might need a new blower in addition to the thermostat. Try calling KitchenAid to find out if the oven needs that blower and get the part number for the thermostat, they might have replaced it with the one with higher temperature rating.
4helpful
1answer

Kitchenaid convection oven fan rattles/noisey

Sometimes the fan blade mounting nut gets loose. Remove the cover from the fan and see if the blade wobbles. If so,tighten the nut on the fan motor.
2helpful
1answer
1helpful
2answers

Kitchenaid kebs177 continues to beep, no display, clock works onl

Hi. try to reset this unit by killing the power or unplugging the cord for 5 minutes. this will reset the control. if the control continues to beep after you reset, this will confirm control failure. you will need to replace the control board in this case.
0helpful
1answer
3helpful
4answers

OVEN will not heat

KitchenAid KEBC107KSS does not heat hot enough and does not heat evenly. When the temperature is dialed higher, it burns the cookies. When the convection fan is on, it has a 'cooling effect' so the temperature never reaches the proper level. Is this problem repairable? Or is this a thermostat issue? Thank you for your help!
0helpful
2answers

Bosch HBL 645 Convection Oven -- No Heat

first out put voltages measures,when output voltages ok , then see the control circuit.after tnat every thing ok. replace heating elements.
0helpful
1answer

Gaggenau oven won't heat on convection setting

this could be due to more than one cause selector switch faulty elements faulty. however this would mean both elements gone - there is one at the top and one at the bottom also worth while looking at the wiring to the convection elements. does the thermostat neon come on when convection is selected?
0helpful
2answers

Oven cuts out after ten minutes and comes back after cooling down.

We have the same problem with our oven, AEG B2190-1.It started on on Christmas day[worst day of year]gets up to temperature after 10-15 minutes cuts out everything switches off until the oven has cooled down, The oven is only 18 months old. We have been told that it is a thermostat problem.
0helpful
1answer

Self Clean does not work

Hi, Before you go working too hard to get you oven to go intothe self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem


heatman101

" Wish I had read this first. I never would have used the self cleaningoption. Thanks for the info!!
Not finding what you are looking for?

152 views

Ask a Question

Usually answered in minutes!

Top KitchenAid Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a KitchenAid Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...