Error 150 net::ERR_SSL_PINNED_KEY_NOT_IN_CERT_CHAIN: The server's certificate appears to be a forgery.

The SSL handshake is initiated when your browser issues a secure connection request to a Web server. The server sends a public key to your computer, and your computer checks the certificate against a known list of certificate authorities. After accepting the certificate, your computer generates a key, and then encrypts it using the server's public key. If the SSL handshake fails, your connection to the Web server will not be secure, potentially compromising your business communications. If you cannot make a connection to secure sites when the handshake fails, you know the handshake safeguard is working properly. Test your SSL functionality by intentionally causing the handshake to fail.

Other possilbitiy is the SSL is out of date.

Hi,
I think the issue is with your browser, in particluar if you are using very old Chrome version.
Can you please try from different browser and also update your existing to the latest version.

This issue is not related to hacking or anything bad but more of a mismatch with requirements and browser.

If you are using Microsoft Internet Explorer,
download & install either Google Chrome or Apple Safari web-browsers, to see if either alternative web-browser can connect.

Check this out


How To Fix Invalid Server Certificate Issue In Google Chrome

Generate Keyopenssl genrsa -des3 -out startssl.key 2048Remove Pass Phraseopenssl rsa -in startssl.key -out server.key
Generate CSRopenssl req -new -key server.key -config "c:\xampp\apache\openssl.cnf" -out server.csr Configure it
give csr at startssl and get certificate and run ... BEST OF LUCK
Useserver.key and certificate u got

Installation of a certificate on Cisco ACS Note: ACS only supports PKCS12 certificates. Before installing a certificate, ensure that the certificate is of this type.
To install a signed certificate: Step 1: Choose System Administration > Server Management > Certificate.
The Certificate page appears.
Step 2: Click Install Certificate.
Step 3: On the Install Certificate page, enter values for:
• Server Certificate Format
This is a display-only field, and displays the PKCS12 certificate type.
• Server Certificate File
Enter the path to the local directory in which you saved the certificate file; optionally, click Browse.
• Private Key Password
Enter the private password key, which can be up to 32 characters.
• Confirm Private Key Password
Confirm the private key password.
Step 4: Click Install.
Step 5: To activate the certificate, you must restart all the processes on the ACS View server.
To restart the server from the:
•GUI-Choose System Administration > System Reports > Process Status, and click Restart ACS View Server.
•CLI-Access the CLI in the EXEC mode, and run these commands:
-process stop all
-process start all
regardsSandeep

Error code: ssl_error_rx_record_too_long Your SSL website may fail to load and display the error

Error code: ssl_error_rx_record_too_long

This usually means the implementation of SSL on your server is not correct. The error is usually caused by a server side problem which the server administrator will need to investigate.

Below are some things we recommend trying.

- Ensure that port 443 is open and enabled on your server. This is the standard port for https communications.

- If SSL is using a non-standard port then FireFox 3 can sometimes give this error. Ensure SSL is running on port 443.

- If using Apache2 check that you are using port 443 for SSL. This can be done by setting the ports.conf file as follows

— clip —
Listen 80
Listen 443 https
— clip —

- Make sure you do not have more than one SSL certificate sharing the same IP. Please ensure that all SSL certificates utilise their own dedicated IP.

- If using Apache2 check your vhost config. Some users have reported changing <VirtualHost> to _default_ resolved the error.

Go to IIS and right click for the domain where you wish to delete the old certificate associated with it.

Right click website from IIS and click properties. From the Directory Security tab. In The Secure Communications click Server Certificate to open the Webserver Certificate wizard. Click Next and choose "Remove the current certificate". Click next until you follow the end of the wizard.

There was a problem logging onto your mail server. Your Password was rejected. Account: 'pop.mail.yahoo.com', Server: 'pop.mail.yahoo.com', Protocol: POP3, Server Response: '-ERR [SYS/PERM] pop not allowed for user.', Port: 995, Secure(SSL): Yes, Server Error: 0x800CCC90, Error Number: 0x800CCC92

make sure your password is correct because this error description states that your password is incorrect