Toshiba TV model 46G310U has a white light behind the screen. Tried to reset to factory settings didn't help.

SOURCE: how do I reset a Toshiba Satellite Laptop to its

you use the backup disk or purchase a windows installation disk please rate if i helped

SOURCE: Reset toshiba satellite A100-TA2 to factory settings

try this link, at appears as if u can download the disks here

http://www.user-guides.co.uk/toshiba/toshibarecovery/toshiba.asp?keywords=toshiba+satellite+a100+ta2+recovery+discs+downloads&recor=121

SOURCE: Sony Bravia No signal plus flickering image and

You know how to reset the tv to its factory setting, I think you are a technician. Second thing you can do is software update. Go to http://esupport.sony.com/US/perl/swu-list.pl?mdl=KDL42V4100&LOC=3#div_pos_30 . If it doesn’t work. Replace the Main board (UB board). Part # A-1547-086-A Cost approx $320.

Knowledge obtain from: Repair experience on same symptom.
Parts reference: Andrews electronics, 800 289 0300.

SOURCE: red distorted color near top of screen not having

Reset will not cure a convergence problem.

this model (ws-65711) uses a single convergence chip located on the middle circuit board (see photo).

If convergence is skewed and will not adjust in customer menu the chip needs to be replaced.

Good news: I have start to finish, step by step instructions for this repair in this set. They tell you everything you will need and exactly how to do the repair.

No two sets with convergence problems will look exactly the same but I will also attach a few photos of this kind of trouble.

If the photos or what I have told you told you something you did not know and you want the instructions (free) rate this solution as very helpful as I do this here for free.

SD TECH


CONVERGENCE CHIP USED IN THIS MODEL.



TYPICAL BOW FROM CONVERGENCE PROBLEM






ANOTHER SET WITH CONVERGENCE PROBLEMS

Testimonial: "This seems to be the problem I'm having Tks for the information great help look forward to getting your instructions to replace the chip. "

SOURCE: I have micromaxx x600 and

my x600 icons need to be reset how do i do this