Question about Miele Washing Machines

1 Answer

The drum on my Miele Touchtronic w113 washer does not spin. It may be due to water left in the system for several months. How can I fix it?

I have a Miele touchtronic w1113 washer. It was being stored for several months and I think there may still have been some water in the unit. I recently connected the washer and tried running it, however it makes a noise and the drum does not spin. I tried to turn the drum by hand inside which did not work. Then I took the panels off and tried to spin the drum from behind by hand which did not work either. I think it may be froze up due to water left in the unit. Do I need to remove the drum? If so, how do I do so?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Miele Master
  • 738 Answers

The unit has a brake you cannot spin the drum in that way,with the back off there should be a lever with a cable on it pull the lever back and get someone to try the bowl then

Posted on Jan 19, 2019

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 91 Answers

SOURCE: why dose the water leak out from the Miele

Hi dear.Please check the door gasket for any wear & tear.(Also open the door,ajar inside the door gasket, check inside of it for any fine tear or cut.)Please check for pump filter.Is it attached correctly.I hope that helps.Thanks.

Posted on Sep 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While spinning, it made a loud noise but finished washing the load while continuing to make the noise especially while spinning fast.


Hi Chantal,
In my many years repairing Miele machines - the most common problem for what you are describing is the underwire from a bra has got in between the inner and outer drum. It's tricky to get out and can be done if you are good with tools and a little technical - but it does involve opening up the machine, removing one of the heating ellements and searching / fishing it out. Another less common reason for this rubbing noise could be the metal heater element bracket that also sits between the inner & outer drum, has bent - but this is normally caused by a bra underwire. Hope this helps.

Sep 14, 2015 | Miele Touchtronic W1213 Front Load Washer

1 Answer

Does anyone have the parts schematic for Miele Touchtronic W4800 drum assembly?


Attached is a IPB for the drain section - are you speaking of Item number 1? This was an issue at one time with the intake side - a piece of felt glued to the drum stopped the chaffing. 5471732e-e156-4138-ab0a-dca218299e0f.jpg

Aug 16, 2014 | Miele Washing Machines

1 Answer

Miele w1113. Washer drum won't spin during wash cycle


I assume you are saying the machine is working except the drums not turning? - you need to see if the belt has come off because thats what i would check first if you hear the motor start/stop after it fills up with water.

May 30, 2011 | Miele Touchtronic W1113 Washing Machine

1 Answer

Why dose the water leak out from the Miele Touchtronic W1113 Large Capacity Washing Machine w/ Stainless Steel Honeycomb Washing Drum?


Hi dear.Please check the door gasket for any wear & tear.(Also open the door,ajar inside the door gasket, check inside of it for any fine tear or cut.)Please check for pump filter.Is it attached correctly.I hope that helps.Thanks.

Jun 19, 2010 | Miele Touchtronic W1113 Washing Machine

1 Answer

Miele Dishwasher G841 - Water not draining after wash cycle


If you suspect the dish washer, try discharging the drain in a bucket. After the drain cycle check the wash tub. If water is still left, you have to clean the drain filter attached to the bottom. Refer user guide.

The final drain end of the dish washer where you discharge, the fixing junction has to be cleaned, incase it is clogged.

Jun 01, 2010 | Miele 24 in. Touchtronic Platinum Built-in...

2 Answers

My miele touchtronic w 3039 will not start. the waterproof system activated keeps blinking in the display window with the start button blinking as well and beeping


Hi,

Sounds like you may have flooded the base of the unit and activated the float switch. Tip the unit forward slightly with a towel at the base and all the water will pour out. You should be right to run the unit after that and any other water inside will dry up. it won't rust as it is stainless steel inside.

You may just have over sudded the unit by using the wrong detergent or too much. After you have the unit running again test the unit with no detergent and see if you activate the waterproof system again. if you do then you will probably have a split hose inside the unit.

Feb 16, 2010 | Miele W2203 Front Load Washer

1 Answer

Miele frong load washer water will not drain, what do I do


Check the hose going to and from your pump which is located on the bottom of your machine. You prob ably have a underwire preventing ytour pump from spinning.

Jan 14, 2010 | Miele Touchtronic W1213 Front Load Washer

3 Answers

Miele touchtronic 1113 washer


There is a float switch in a pan under the machine. This pan is probably full and the float switch is causing the Intake & Drain fault signal. You can lean the machine over to towards the front to partially drain the pan. Put a towel down to catch the water. When you put the machine level again the fault lights should be out. The real question is where did the water come from. You can easily remove the top (4 screws, 1 on each side behind the little plastic caps and 1 on each side of the back. Torx heads) and look down inside while you start the cycle. Look for leaks.
Good Luck,
Dan

Aug 09, 2008 | Miele Touchtronic W1113 Washing Machine

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

mpservices

Level 2 Expert

190 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Miele Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...