At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Telxon PTC-710 has utility readings stored on it. Computer software update made the unit incompatible. Can the information stored on the device be viewed without connecting to computer?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
http://www.texon.com/contact-us
USA Sales and Customer Service
Contacts:
Phil Bouldin - Group Sales Director
Tel: +1 978 239 9473
Ben Soto - Global Accounts Manager
Mobile: +1 801 330 6519
Tom Muller - Global Accounts Manager, East Coast
Tel: +1 914 474 9294
Roy Hill - Global Accounts Manager, West Coast
Tel: +1 503 957 3377
Sue Mitchell - Customer Care Manger
Tel: +1 413 862 3652
These old Telxon devices had a switch in the battery compartment to disable the backup battery for storage, power off the unit then change the switches position and try again.
If you still have the problem the unit will need a new backup battery fitting. The unit will need to be opened and a new cell soldered onto the mainboard.
Try to "three key" the device. Hold the bottom left and right key (No & Enter button on my device) and whilst holding press the power button. This will boot into DOS/Tcal prompt. Also check the battery contacts and ensure the battery is well charged.
These old Telxon devices had a switch in the battery compartment to disable the backup battery for storage, power off the unit then change the switches position and try again.
If you still have the problem the unit will need a new backup battery fitting. The unit will need to be opened and a new cell soldered onto the mainboard.
with the unit off, hold down the two keys on the bottom corner (enter, sp key) and press then release the on key while continuing to hold down the "enter" and "sp" keys until you get a promt on the display.
When a prompt comes up release all the keys. Hold down the 5 key for 3 beeps. The unit will test memory for about 1 min, then beep. Press any key to turn the device off. Then press the on key to power the unit back up.
if you need additional information please let me know.
We have all manuals and sofware for this Telxon device.
You can always contact me directly [email protected] or 630-622-2024 toll free 866-271-9891 Ask for Andrew
Hello swschmidt. You are spot-on! You need to do a wee bit of configuration. I host he LS2208 manual on my company site for my clients (www.shiftintoblue.com/resources/ls2208_manual.pdf). Head to page 146: "Wand Emulation Host Parameters". Print that page and scan the 'Symbol PTC Terminal (Telxon)' barcode and you'll be all set. I hope this helped. Good luck!
×