SOURCE: slow, overheating, shuts itself off
sounds like your internal fans are taking early retirement, from all the symptoms..like running a car with no oil, you don't want to run a dell desktop without internal cooling..need to replace that fan..not too hard, actually.
SOURCE: LG projection TV model 52SZ8D-UA sound go on and off
your audio board is going out take it to a shop and have it fixed
SOURCE: Imperial deep fryer IFS40 pilot lights, turn on
Hi there, it sounds like your thermopile, for the pilot, is failing during use, when this happens, the small DC voltage it generates is less than the gas valve requires to stay open, and shuts off the pilot, which shuts off the main burners. Another thing that could be happening, is the hi limit is opening prematurely, instead of shutting of the pilot at 450 deg. it now is opening at 325, or 225 or 250. Sometimes the sensing bulb gets broken where it pass's through the oil tank causing this symptom. If you temporarily bypassed the hi limit to test this also, and it still goes off, you need a thermopile. If it stays on, check your temp with a reliable thermometer, and see if it reads fairly close to your setting, if so, then you need a hi limit.
Hope that helps, and thank you.
SOURCE: Hobart 250ci quit working
I don't know if it is the same problem that I had. Open up the case where the compressor is and check the air line. If it has come undone the cutter will not do anything. Just reclick the line back on and you should be in business.
SOURCE: need schematic for hobart airforce 250ci plasma
Found out the model was still under warranty.
466 views
Usually answered in minutes!
×