This is a under temp code from Temp sensor 1 (TEMS/1). You should check your thermistor, clean it. Then you have to reset the code.
To reset: Go to DipSW 3-1 and set to 0.
You may have a bad sensor or heat lamp.
Hope this helps.
SOURCE: minolta bizhub erorr codeco202
Hi,
CO202 relates to tray 1 (top tray). It hasn't managed to lift the paper successfully.
Open the tray, remove the paper, reset the machine (open/shut front door) then reload the paper and try again
Hope that helps
Regards
Taminol
SOURCE: minolta bizhub 420 code c2403
this error code means there is a problem with the toner bottle drive most likely the toner rotation sensor will need to be replaced
SOURCE: desbloqueo del codigo m2 en konica minolta bizhub 163
Este código significa que la vida las partes de su desarrollo + unidad de imagen se ha caducado. Ahora es el momento de reemplazar las partes.
SOURCE: How to fix Error Code C3901 on a Minolta Bizhub
Enter service mode & Clear All
Utility>Stop>0>0>Stop>0>1
All of this within 3 secs.
Please Rate me.
132 views
Usually answered in minutes!
×