How do I take a bushnell 1300 lumen flashlight apart? it was dropped and I believe a short is in the bulb assembly .

It carries an LED Module, so they aren't like replacing a halogen bulb, you have to replace the whole module with the LED.

Just replace the whole lamp for 10 bucks!

BLACK+DECKER SL3WAKB: Compact 300 Lumen LED ...

AZ Electronics https://azelectronics.ca > products > sl3wakb-bla-compa... BLACK+DECKER SL3WAKB: Compact 300 Lumen LED Spotlight Flashlight · LED delivers bright beam of light · Compact and lightweight design · Power saver setting to ...
$9.99 · ‎ In stock

..

If you mean the little tiny micro flashlight the Coleman 200 LUMEN flashlight the bulb can be removed by unscrewing the battery holder from the sleeve and accessing the battery.
There is no such thing as a Colman 200 flashlight.

The Red (L+) and White (L-) wire on the LEFT are for the main Bright White LED. The wires on the RIGHT are for the LEDs. Black (BT=Blue LED), White, (R-= Red LED) and Red, (L+).

NOTE: I mixed up the wiring for the red and blue LEDs so you should be able to flip the black and white wires on the right-hand side but other than that everything should be good.

Check with google. They may have a video

Taking apart a flashlight, including a Bushnell 600 Lumens flashlight, may not be recommended, as it can void the warranty and potentially damage the device. However, if you have a specific need to disassemble it, here are some general steps to follow:

1. Remove the batteries: Ensure the flashlight is turned off, and remove any batteries to prevent any accidental activation or electrical shock.

2. Look for screws or openings: Most flashlights have screws or openings around the head or tail cap that allow access to the internal components.

3. Unscrew components: Use the appropriate screwdriver or tool to remove any visible screws holding the flashlight together. If there are no screws, try gently twisting and separating the parts.

4. Be cautious with wires: If your flashlight has internal wires and circuitry, be extremely careful not to damage them while disassembling the flashlight.

5. Document your steps: Take photos or notes as you disassemble the flashlight to help you remember

The bulb may be blown. If the bulb is ok then you may have a broken wire, corroded connections or a bad switch.

Hi, replacement bulbs can be found at amazon, click here and take a look: Amazon com flashlight replacement bulb. Cheers

These are notorious for the switches failing. Mag will replace it for free if you ship it back to them.
Phone 909 947-1006

when you dropped it you probably knocked the contacts inside out of place. or you broke a soldered connection. if you can take it apart you can most likely fix this yourself. when you remove the front lens assembly there is a retaining clip that you need to remove so you can take the guts out.....please rate this