How to I get cricut off line - Crafts & Hobbies

Remeasure and recut the pieces. You somehow mismeasured one or more of the colors.

Don't cut more than one color at a time, and fit it to the rest of the design before you cut the next piece.

If your Cricut machine is not cutting all the way through your material, or is only scoring the material, choose a machine below for specific troubleshooting tips. Fortunately this issue can usually be resolved with basic troubleshooting.

• Cricut Explore
• Cricut Personal, Cricut Create, Cricut Cake, Cricut Cake Mini, Cricut Expression
• Cricut Expression 2, Cricut Imagine
• Cricut Mini

correct cut settings.

Remove the blade housing, then remove the blade and ensure that there are not any bits of paper stuck to the blade or lodged inside the blade housing. Ensure that you replace the blade housing correctly into the machine. Once clean, test your cuts again. If the blade and housing are already free from debris, or cleaning it did not help, proceed to 3.

Try an arm buoyancy test: gently press down on the black arms that surround the blade housing and then release them. Do they bounce right back up, or do they stick or rub in any way? If they stick or rub, please contact Customer Care through one of the options below for further assistance. If they bounce right back up when released, proceed to 4.

Increase the machine pressure settings and try your cuts again. If this does not change the cut result, proceed to 5.

Increase blade depth by turning the dial at the top of the blade housing. If this does not change the cut result, proceed to 6.

Perform a Hard Reset on the machine. If this does not help, proceed to 7.

Check your machine's firmware version. If the firmware is not up to date, perform a Firmware Update using Cricut Craft Room, a Gypsy device, or Cricut Design Studio.

Retry your cuts with a new blade housing.

If the machine is still not cutting through materials, or is only scoring the paper, please contact Customer Care through one of the options below for further assistance.

Forced Firmware Update on the machine through Cricut Sync.

Retry your cuts with a new blade housing. If the issue persists, proceed to 8.

Attempt a Format and Restore on the machine through Cricut Sync. Please note that this step should only be taken if all other steps have failed to resolve the issue.

If this does not resolve the issue, please contact Customer Care through one of the options below for assistance.

new blade. If this does not help, proceed to 5.

Adjust/increase the Multi-Cut setting in the Cricut Craft Room cut preview screen and retry your cuts. If this does not change the cut result, proceed to 6.

Retry a cut using a new blade housing.

If the machine is still only scoring or not cutting through the material, please contact Customer Care through one of the options below for assistance.

Cricut design studio is no longer supported by Cricut but if you mean Cricut Design Space then this is how you do it. Open and sign in to Design Space select insert images and in the box on the right select my Image sets and then type in Artbooking. Artbooking cartridge will then come up for you to select what you want. all images come onto the mat at 2.5 inches they havent fixed this yet so you have to resize your images. If you want to download the image numbers from the artbooking book which go with design space go to http://thenon-craftycrafter.blogspot.co.nz/p/image-codes.html and download the artbooking book from this lady please join her blog and leave her a message as she does a lot of work all of which she does for free. Also if you youtube cricut design space. or go onto design space in cricut.com

http://www.cricut.com/shop/#0/1/349/3/Cricut/Cricut%20Expression%20Machine%20Replacement%20User%20Manual

This has a list of all the replacement parts on the left side.

http://content.cricut.com/c/downloads/JukeboxManual.pdf

There you go :D

I need more information. Are you using Cricut Design Studio or cutting just from the cricut itself. If you're cutting from Design Studio then you need to make sure your letter is within the space of the mat. If there is some hanging off the edge or past the cut line then it will skip over it and not cut it.

Have you been here? http://www.cricut.com/ ?

You may find someone here who has this manual but ... and this is BIG ... Terms of use agreement for this site prevent any contact between us (Question asker and Question catcher) outside of this forum. We have the larger model Cricut and, for the cost, I would get the manual to you - but I cannot jeopardize my standing here at FixYa.com for the buck or two that I might receive from this transaction.

Most people who answer questions here are volunteers working out of their home, like me. If there is a large depository of instruction manuals here on this site, I have not discovered it.

If all else fails, I would suggest that you send a e-mail to the company (at the above address) and ask to purchase the manual or the CD that comes with your make and model.

Thanks for your question and I hope you find your manual. Did you try asking the person you bought the device from?

By the way, we love our Cricut! You will have a lot of fun with it.

Cricut does not accept jpegs. They use their cartridges that come with the machine and others that you can purchase. However if you have Cricut Design Studio you can design your image with the cricut. Any further questions feel free to ask.

I would contact Cricut as there is a way to reset your machine. Resetting your machine may fix the issue. If it continues after the reset Cricut may ask you to send the machine to them. They will however ship another to you after applying a charge to your card then removing the charge after you ship your machine with issues back to them.

I am having the same problem...did you have any luck solving it?