My Konica Minolta page pro 9100 won't print 11X17 only 8.5X11

https://www.google.com/search?q=Konica+Minolta.+Why+doesn%27t+the+blade+clean+the+magenta+after+printing+color

Thread: Bizhub C253 Magenta/Black Stripes across the page

https://www.copytechnet.com > ... > Konica Minolta
Jun 8, 2020 - If the cleaning blade on the ITB have the "chatter" marks for more than one color and they're blurred, you can be darn sure the problem is ...

• 
  

  BizHub Pro C500 jam code 17-01 and magenta streak toward back ...

  https://www.copytechnet.com > ... > Konica Minolta
  BizHub Pro C500 jam code 17-01 and magenta streak toward back of copier. , As suggested I cleaned all the feed and paper path rollers with rejuvinator.
  
  ..

what is enbal 72???????

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The machine is very old. Before Konica and Minolta merged. QMS was under Minolta. Don't believe you can get the drivers but try Konicaminolta Web site.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

have you log in to the copier via page scope and properly set up the scan to email info required, such port, mail server, authenication procedures

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

QMS is a legacy company under then Minolta, now Konica Minolta I believe page pro 9100 is very old I believe that it would work with windows 95 or xp at best.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check the sensor. for the upper output pin. it mite need to be replaced.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Try makeing one page a doc.

Please get the correct driver here : www.printcountry.com/drivers.asp
www.opendrivers.com/.../printers-free-driver-download.html
www.driversdown.com/driverslist/r_4_1.shtml
Regards, Jay__j83x0

I found out that it was some (vector) snowflakes we had in the art that had gradients that caused the printer to freeze.

We removed (in Adobe Illustrator® CS3) all of art work then replacing it on piece at a time, printing OK until we added the snowflakes. Turning the gradients into just halftones was our solution. The printer representative is going to give our printer a memory upgrade for free.

I am not clear with the quarry you ask but what I understand that you can print larger the A4.so in all Konica Minolta printers which I have used we must specify the paper size before printing in the printer properties and confirm that the same paper size we have putt in the printer’s tray. if more then one trays and installed in the printer the printer can print all available paper size without specify them. But spouse if you send a legal size print to the printer and there in no legal size paper in the paper tray then it will show a error.
What I think it is paper size issues please check it and make sure the trays are fixed to the size which you putt in.