Hoover vision dynamic wd 8.5 wdyw 854 Db,water is not going into machine any help would be greatly apreciated . machine just.any help in fixing problem would be greatly appreciated,thank you.

SOURCE: Hoover Vision 1600 AAA Washing Machine error code 5

High summerzaman,
the error mean an problem by the temperatur sensor of the water. It is possible an defect of the sensor or cable between the sensor and the microcontroller or the controller self.


with regard Andreas

SOURCE: Hoover Vision 1600 drum not spinning?

I have similar problem with same model unit, found brushes on motor worn to point copper contact is hitting and scoreing commutator. Easy checked, ensure power completely disconnected, lie machine on side and gently rotate drum looking in side the motor. The commutator is what looks like a circular block of copper segments which will rotate with the drum and should be evenly worn and coated with carbon from the brushes. If you see a clean copper area, usually in the center, then the brushes are worn down below workable levels. Suggest replacing should resolve problem.

SOURCE: Error code 8 on Hoover vision hd 9 kg frontloader. No Manual.

Had same problem wouldnt spin found clip on motor had come loose pushed it back on problem solved!

SOURCE: hoover vision hd 1400 washing

I had the same problem. The machine would wash but not drain and the time savers button would blink. Turned out to an eye from a teddy blocking the pipe that enters the drain. I hope this helps.

SOURCE: My hoover washer dryer VHD is showing a fault E11

It means there is a problem with the dryer board on it.You can try removing
the lid and just check the dryer control board on it.Make sure the
connections are ok and that none of the wires are broken.Then if the wires are ok the dryer control board will need to be replaced.