Refrigerators Logo

Related Topics:

K
Karen Wainwright Posted on May 22, 2018

Why does ice maker make ice but but very s-l-o-w-l-y?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Kenmore bottom freezer ice maker not working.

  1. Reset the ice maker: Check the manual that came with your fridge for instructions on how to reset the ice maker. Many refrigerator models have a reset button or switch that can be used to reset the ice maker.
  2. Check the water supply: Be sure the water supply to the refrigerator has not been turned off or become obstructed. If the water supply is turned off or obstructed, the ice maker will not make ice.
  3. Check for obstructions: Make sure there are no obstructions in the ice maker that would prevent it from making ice. If there is something blocking the ice maker, remove it and try again.
  4. Check the ice maker components: check the components of the ice maker such as the water inlet valve, ice mold thermostat or heater. The problem could be with one of these components and replacing them might solve the problem.
If trying these steps doesn't solve the problem, it might be time to replace the ice maker.


0helpful
1answer

WRF535SMBMOO Whirlpool refrigerator without door water dispenser, but has ice maker, why does ice maker start and stop making ice ? Ice "arm" is in on position but no ice being made.

If your Whirlpool WRF535SMBMOO refrigerator has an ice maker that starts and stops making ice, there could be a problem with the ice maker itself or with the water supply to the ice maker. Here are a few things you can try to fix the problem:
  1. Make sure that the ice maker is turned on. The ice maker has an on/off switch or button that you may need to activate to start making ice.
  2. Check the water supply line to make sure it is not kinked or clogged. The water supply line delivers water to the ice maker, and if it is blocked, the ice maker will not be able to make ice.
  3. Check the water inlet valve to make sure it is open and functioning properly. The water inlet valve is responsible for controlling the flow of water to the ice maker, and if it is not working properly, the ice maker will not be able to make ice.
  4. Check the ice maker for any visible damage or debris. If the ice maker is damaged or clogged with debris, it may not be functioning properly.
If the problem persists after trying these steps, it is possible that there is a problem with the ice maker itself. In this case, you may need to have the ice maker inspected by a technician to determine the cause of the issue.
0helpful
1answer

Samsung refrig, side by side, won't eject ice. How do I turn off the left hand light to quit ice?

How to Repair a Refrigerator Ice Maker ' HomeTips

www.hometips.com/repair-fix/freezer-ice-maker.html
If your ice maker doesn't make ice, check out these expert do-it-yourself ice maker repair ... W. Branner Side by side GE fridge, stopped dispensing ice both cubed and crushed. ... But now that it's cleared the motor won't run to dispense any ice (water .... Our Samsung French door ice maker is not working & is making noise.
0helpful
1answer

GE Ice Maker freezing

Not sure exactly what you mean by the ice maker freezing, ice makers are suppose to freeze. But if you are referring to the ice maker not being able to harvest the ice since it is frozen in there to tight, then the heater that is on the bottom of the ice maker has failed and you will need to replace the ice maker.
Here is a link to the new ice maker.
4helpful
1answer

Ice maker stop working

Is ice maker not working, do you mean it has no power at all.Then its faulty control board.But if there is power to ice maker and its not making ice then its not board but it can be faulty valve.---------

Ice maker stopped making ice. For this problem you have check few things. First thing, is the water filling in the ice maker chamber and then ice maker not making ice? Or, the water is not filling in the ice maker chamber so it's not making ice. If the water is not filling in the ice maker chamber then it's clear that ice is not getting made due to no water in the chamber. For no water filling, the problem is either water supply valve turned off so water is not filling. Turn on the water supply and it will fill. But if the water supply is turned on then the other possibility is ice blockage in the water fill tube. There is a tube from which the water runs and enters the ice maker chamber. If this tube is blocked then water will not enter the chamber. The tube needs to be defrosted, by using hair dryer. This procedure melts the ice collected in the tube and water starts running again. But if water fill tube is completely clear and no ice blockage or any other blockage. Then other possibility is water valve at the back of ice maker unit. This water valve is for letting the water in the ice maker. The water valve open only for 7 seconds and in this time the water fills in the ice maker chamber and then water valve closes and the same procedure runs again in the next water filling cycle.------- For your information I will mention that there are two valves. One is the main valve the back of the fridge section. This main valve lets the water enter the refrigerator and other valve is at the back of ice-maker section. This other valve lets the water to enter the ice maker. In most of the cases the fault is water valve at the back of ice maker section. ------------- The other above possibilities which I gave you is water not filling in ice-maker chamber so it's not making ice. But now consider that water is filling in ice maker chamber but it's still not making ice. Then the problem is ice maker unit itself. This unit is controlled by main board. But in most cases if water is filling the ice maker but it's not making ice then its faulty ice maker unit. So see if the problem is water not entering the ice maker then the water fill tube is frosted by ice or the water valve at the back of ice maker is faulty. Replace the valve. ------------

You can get required parts from sears part direct online site or from repairclinic.com site.

--------

This will help. Thanks. Helpmech.

1helpful
1answer

The ice-maker in my Daewoo Fridge Freezer (FRS-U20DAI) is not working. The ice tray does not empty.

is there ice in ice maker but it wont empty?
the ice maker has built in heater underneath. thats how the ice detaches itself from the ice maker and the fingers rotate them out.. if you have ice in the ice maker then replace ice maker

hope this was helpful
Mar 27, 2010 • Freezers
3helpful
1answer

Ice maker not making ice. do have water, no ice

The ice maker has a problem The ice maker is a separate appliance within the freezer section. Please see the How things Work section of our website to learn about the normal functioning of ice makers. Some common problems with ice makers are:

The ice maker has completely stopped producing ice
The ice maker is producing ice poorly
The ice maker has completely stopped producing ice Check to see whether the ice maker has been turned off. Here's how to check. Look for a wire along the right side of the ice maker that looks a bit like a coat hanger. If this wire is in the raised position, the ice maker is turned off. On some units you simply lower the wire to the down position to turn the ice maker on. On others, you lower a small red plastic lever to lower the wire. If the wire is in the proper position check the freezer temperature, it should be between 0-8 degrees Fahranheit. If it is warmer than 10-12 degrees, the ice maker may not produce any ice. Check your door seals and thermostat, repair/replace as necessary.

The ice maker is producing ice poorly When an ice maker is producing ice poorly--when it produces just a few cubes or none, or when the cubes are too small--it's usually because of a clogged water line or a defective water inlet valve.

First, check the water line attached to the back of the refrigerator for good water flow. To do that, first turn off the water supply valve. Then remove the water line from the back of the refrigerator. Next, place the water line into a bucket and momentarily turn the water valve back on to test the flow. If the flow is poor, you need to repair, clean, or replace the tubing or the shut-off valve that supplies the water. If the flow is good, you may have to replace the water inlet valve.
0helpful
2answers

GE ice maker, solid ice in ice maker

Many ice makers have an adjustment screw behind the front cover that shows plus or minus. Try the minus turn of the screw that should shorten the amount of time the ice maker fills. If electronic please call the company you purchased it from and explain the problem. Sea Breeze
Not finding what you are looking for?

172 views

Ask a Question

Usually answered in minutes!

Top Emerson Refrigerators Experts

Johnny 1000

Level 2 Expert

94 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you an Emerson Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...