Manual for moffat washing machine mtw2oobmkoww

Here are the steps to remove the agitator from your Moffat top loading washing machine:

1. Unplug the washing machine from the power outlet and turn off the water supply.
2. Open the washing machine lid and remove any clothing or items inside.
3. Locate the agitator in the center of the machine's tub. It should be a large plastic or metal component that rotates during the wash cycle.
4. If your agitator has a fabric softener dispenser on top, remove it by pulling it straight up.
5. Look for a locking mechanism at the bottom of the agitator. This is usually a plastic tab or lever that needs to be pressed down or pulled up to release the agitator.
6. Use a flathead screwdriver or a similar tool to press down on the locking mechanism while pulling up on the agitator. This should release the agitator from the tub.
7. If the agitator does not come off easily, you may need to use a bit more force. Try rocking it back and forth while pulling up on it to loosen it from the tub.
8. Once the agitator is removed, inspect it for any signs of damage or wear. If it is damaged or worn, you may need to replace it.
9. To reinstall the agitator, simply line it up with the center of the tub and press down firmly until it locks into place.
10. Finally, replace the fabric softener dispenser if you removed it earlier and close the washing machine lid.

Note: The exact method for removing the agitator may vary slightly depending on the specific model of your Moffat washing machine. If you are unsure about any of these steps, refer to your machine's user manual or contact a professional technician for assistance.

The fix is a new Logic Board. They are expensive. I would set the wash and just leave it to do its thing.

I wonder why they named it after 'BMW'?

https://service.geappliances.ca/servicio/en_CA/Laundry-Care/Washing-Machines/Moffat-4-4-Cu-Ft-Top-Load-Electric-Washer-White---MTW200BMMWW/p/MTW200BMMWW

..

http://www.automaticwasher.org/TD/JPEG/VINTAGE/2012/aldspinboy++10-5-2012-05-56-43.jpg

HI, I spent many years in apartment maintenance and most communities have maintenace staff to fix issues you have with their equipment,call the leasing office.The most likely cause is a bad timer.

Here ya go. Try this link to the manual from Moffat.
http://www.geappliances.ca/images/english/pdfs/350A4502P546-P548.pdf

moffat washing machine does not remove water after spin cycle

Head over tho the manufacture's website.

Typically - they have a SUPPORT section that you enter your full model number in, and you can download the manual for free.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Yup I did.
Still under warranty.
Lucky for me..

how do i install a belt on my moffat dryer model # ruxr453ev1ww

clothes need be more drye ofter end work