Question about Konica Minolta Office Equipment & Supplies

1 Answer

How do I reset a drum if the machine is showing replenish drum unit after I've replaced .Its a Konica minolta

I've logged on to the service mode ,counter,life,k drum rotation but I can't find the option to reset it.MINOLTA C554E

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Konica Minolta Master
  • 6,830 Answers

Because there is a chip on the drum to tell the copier i am new

Btw, I’m available to help over the phone in case u need at

Posted on Mar 04, 2018


6 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 107 Answers

SOURCE: I just replaced the drum

hello, first did you follow instructions of reseting machine when you replaced drum, if not here is the istructions, with machine in ready state, press go button and up arrow at same time, the reset parts life comes up, use up arrow or down arrow to scroll thru to drum replacement, press the ok button when you get to drum, the machine will have drum unit ok?, press okay, machine will cycle and reset drum.

Posted on Nov 03, 2010

  • 2 Answers

SOURCE: Replaced new drum unit but LCD keeps saying Drum Near End of Life

Front cover must be open

Press The "Clear" key on the top panel

Press 1 to reset the drum count

Close the over

Posted on Feb 06, 2009

  • 413 Answers

SOURCE: How can I reset my Drum Life Counter on my Printer?

Guide Users: B4250 download user manual

American English

Posted on May 07, 2009

  • 240 Answers

SOURCE: Need to reset parts life for belt unit, replaced

Hello mstjean,

You can access the reset menu by pressing the 3 and 9 button at the same time.

Posted on Mar 25, 2010

Testimonial: "Thank you for this timely and simple solution to my problem. I never would have figured it out without your help!"

  • 107 Answers

SOURCE: how do i reset drum

hello, i am going to ball park this, with machine on, open up front cover as if you are going to replace toner, press the clear button, on the display it may say, new drum press 1 for yes 2 for no, then close front cover. normally the drum comes with the instructions on this, but sometimes its missing, but also brothers web site has the info on this. i work on these alot so most of the resets are the same

Posted on Oct 08, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I rest a drum on konica minolta C554e

Then the drum you replace is not new there is a chip on it which tell the copier its new

Btw, I’m available to help over the phone in case u need at

Feb 27, 2018 | Konica Minolta Office Equipment & Supplies

1 Answer

Konica minolta bizhub 195 shows M2 error after changing the developer how to reset M2 error?

Did you also replace the drum, clear the developer counter first before installing the developer, and run the required F 8 procedure after the developer was installed, As the machine uses the counter to control voltages to certain assemblies, not replacing the parts and resetting the counter will cause codes and image issues.

Btw, I’m available to help over the phone in case u need at

Jan 19, 2016 | Konica Minolta bizhub Office Equipment &...

1 Answer

How to solve error c0650 on minolta di2510

Did you changed the home sensor? If yes, is the sensor working properly? Try the sensor function in Service Mode.
Konica Minolta Error Codes & Solutions -
Drum, Transfer Belt and Fusing Unit Firmware Reset -
Drum and Toner Chip Reset -
Transfer Belt and Fusing Unit Reset Kit -

Aug 18, 2014 | Konica Minolta Office Equipment & Supplies

1 Answer

Please set replenish toner unit correcty

Replenish toner unit is the unit that is secured with two screws and comes to the right and these are unscrewed. The presence of this unit is signaled by a sensor positioned under the top cover. Check that sensor for proper functionality in Service Mode.

Jun 01, 2014 | Konica Minolta Bizhub Press C6000 Copier

1 Answer

I want to change the setting of my drum unit on a konica minolta C-360

Enter in the service mode by press following keys:
Utility - Meter count-Check details - Stop - 0 - 0- Stop - 0 - 1 - Stop -0 -C - setting IU life stop setting and select NO STOP.

Feb 20, 2013 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Ihave konica minolta bizhub 43 i replaced anew fuser unit but its still showing consumable error replace fuser unit how can i solve this

Enter in the service mode: press Utility key-Metercount-(Details if exist)-Stop -0 0 -Stop -0 1 select a special parts life or in the counter mode consumable and reset the fusing unit counter.

Feb 04, 2013 | Konica Minolta Office Equipment & Supplies

1 Answer

Price of Konica Minolta imaging unit for Bizhub 162

You do not replace the Imaging Unit as a whole on this model. The Imaging Unit is made of of 2 parts. The Drum Unit and Developer Unit. If your "replace imaging unit" indicator is on then typically what happens is your local Konica Minolta or Independant service shop would come out and replace the Developer (aka Starter) in your developer unit and replace the drum unit part of your imaging unit. This must be done in sequence with resetting the counters in the service mode. If not done properly the counters will not reset or the new developer will fail to calibrate properly so copy quality will be poor or you will end up with a COF32 code. That being said, all I can tell you is that a fair price to perform this scheduled maintenance on the 162 is about $350.00. This will vary depending on local labor rates and how much the dealer marks up their parts. My current cost on the drum unit and developer is about $100 so you can use that as a general guideline in case some dealer tries to rip you off.
Good Luck and Thank You for using Fixya.

Nov 20, 2010 | Minolta Konica Imaging Unit for DI350...

1 Answer

Change PC Drum Message on Bizhub362.How do you resset this message?

You are going to need to call your service company and have them replace the drum unit for you. Don't listen to anyone that gives you the service mode entry procedure and drum count reset. This WILL screw up the AIDC (Automatic Image Density Control) and the machine will shut down with a COF32 code. There is a very specific procedure which must be followed when replacing/resetting the drum counter on these machines as there are several "counts" that are tied together. Trust me on this as a 27 year Minolta Tech, spend the money and have the drum unit replaced. They are good for 100,000 copies so even tho it may cost some money to do. Divide that cost by 100,000 pages and it gets pretty cheap.
Good Luck and Thank You for using Fixya.

Sep 09, 2010 | Konica Minolta Bizhub 362 Copier

5 Answers

How do I clear error message C-2558 for the Konica Minolta bizhub C253

tis error means abnormal tonder density in the balck image unit take the blacke image unit out and shake it while holding it level and put it back in the machine to reset the error code leave the machine on and open then close the front door

Nov 12, 2009 | Konica Minolta bizhub C250 All-In-One...

2 Answers

Konica/Minolta biz 350 C2557 after replacing DV unit and drum F8

tha minolta di3510 developer unit looks the same as the unit for the konica minolta bizhub 350 but the toner sensor in the minolta unit uses a different voltage range for the toner sensor and it will throw this code make sure you have the correct unit for this machine also you can try this
go back into tech rep mode and change these settings:
select tech rep choice mode
select printer tab
select atdc sensor gain
set the value to about 165
then back all the way out to the ready screen and power the machine off then back on and replenish toner in the user management screen.

Apr 22, 2009 | Konica Minolta bizhub 250 All-In-One Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6830 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides