Bizhub 185 c2558 Error how to clean - bizhub Konica Minolta Office Equipment & Supplies

The 2558 error code refer the abnormally high toner density detected black tcr sensor.If you replaced the developer must necesary replaced the imaging unit chip,because the new developer detected the old parameters.

Its a black unit error code
It means the black toner is not supplying to d developer you can reset error code by logging in d service mode

replace the drum and developer and run TCR and gradation adj

Minolta bizhub 164 error code C2558 how can solve

replace the drum and developer and conducted required procedures

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Maintenance call (m2) call service

Replace the developer and drum

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the drum and developer

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Abnormally high toner density detected black TCR sensor
TC ratio in the imaging unit, which is determined by toner replenishing amount control mechanism, is a predetermined value or more for a given number of times consecutively.
check for developer
check TCR sensor
check toner sensor
check the PRCB

help me my konico minolta bizhub 184/164 error (C2558)
my mail id - [email protected]