How to set up 24 hour time on casio 3053 watch

• Switching between 12-hour and 24-hour Timekeeping ...

  support.casio.com > ... > Operation Guide > Watch Settings
  
  Casio[SET Hold] will appear and the time offset value will flash on the display. ... Press B twice to display the screen for selecting 12-hour or 24-hour timekeeping. ... STB-1000 User's Guide for Watch Functions Operation Guide Main Menu; Basic ...

  [PDF]how to set a three-handed watch with 24-hour hand and date

  www.alessi-watches.com/eg/pdf/VT99_eg.pdf
  28. 29. (4) Pull out the crown to position 3, and turn it clockwise to advance the hourand minute hands to the current time. If the current time is 9:00 A.M., the.

  [PDF]how to how to set a two-handed watch with 24-hou

  
  

Try this:-

First set the watch to 24 hour format rather than 12 hour format.

http://support.casio.com/storage/en/manual/pdf/EN/009/qw3225.pdf

Hi Harry,

Your Module number is 2271.
1. To set the time, press and hold button A (left top) until Seconds digits start to flash.
2. Press button D (lower left) to move flashing in the following sequence to change other setting:
Seconds >> Hour >> Minutes >> 12/24 Hour Format >> Year >> Month >> Day >> (Then back to Seconds)
3. While a setting is flashing, use E (+) (bottom right) and B (-) (top right) to change it.
Note: When in the 12/24 Hour Mode, use E and B to toggle between 12-Hour and 24-Hour Mode.
4. Press buton A to exit setting screen.
Your time should now be set.

You may also download a manual for watch/Module number:
http://pathfinder.casio.com/resource/manuals/module_2271.pdf

This should give you all the info you need to operate all the functions of your watch. Thanks.

Regards, Bill

mcdevito75 here, Many Casio Watch Models out there, I'll bet however your Casio is displaying say 1 AM rather than 1 PM as it should if the time is indeed PM after 12 noon, if so, this is why the date is changeing at 12 PM rather than, 12 AM simply re-set your casio and make sure the time of day is set at PM for time after 12 noon and AM for time anywhere before 12 NOON. Also, as you set your Casio, look for anything that may give the hint of Military time, this may be revilled as 12 hours or 24 hours, if you have anything like this, make sure it's set for 24 hours. If you have additional problems, visit a small watch repair shop in your area. Again there are many, many Casio models out there and without your watch with me it's difficult to be more accurate.

try the link below
http://www.manualslib.com/manual/357955/Casio-3053.html

If you haven't got instructions on how to do this, you can get
instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

On the Casio 2747 you can easily change between 12-hour and 24-hour (i.e. Military time)... Follow these steps:

1. Make sure you are in Timekeeping Mode (i.e. digital display shows date at the bottom).
2. Press the "D" button (i.e. bottom-right button) to toggle between 12-hour and 24-hour timekeeping.

Note: 12-hour timekeeping mode will display an "A" or "P" for AM and PM.

Visit:
world.casio.com/wat/download/en/manual/ - 23k - Cached - Similar pages
Download your manual.