To program your Innovage Jumbo Remote Control, you can ask it to cycle through all the codes it knows for TV's, DVD's, SAT boxes etc.
To have the remote try each TV code it knows one at a time, follow these steps:
- Turn on your TV.
- Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
- Press the TV button on the remote so that the LED blinks once and then remains solid red.
- Press the ON/OFF button slowly and repeatedly until
the TV turns off. The LED will blink once each time you press the
ON/OFF button.
- Once the TV turns off, press the ENTER button to store the code and the LED will turn off.
To program for your VCR, repeat the steps starting with turning on your VCR, and substituting the VCR button for the TV button.
I hope that helps.
×