How to by pass 1750 error code on canon mg6820 after adding ink cartridge

SOURCE: canon mp150 pixma printer error e5

dear warenout

try this methode

Methode 1

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting formenu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection


that's all


maybe it can fix your problem



thanks


cropp

SOURCE: Cannon IP1880 Cannot detect Cartridge

press the resume button 5seconds(this disable ink cartridge monitor..

SOURCE: My Canon Pixma MP220 is

Same thing happened to my MP220. U051 chk Blk and Colour. I got my colour one replaced as there was an electrical fault in it. So the solution is to replace whichever one has the electrical fault or both and it works just fine. Refilling only works for a certain number of times. 4 or 5 at most and mine only lasted 1, so not always successful.

Clive

• 4362 Answers
• Posted on Feb 07, 2010

SOURCE: E,5 error in Canon MP190 printer after adding ink

Hi there ok

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

SOURCE: Canon MP190 not printing using only black ink, color ink finished

hai there...you try press the reset and colour button in the same time...the printer will back to normallyl