My AEG Lavamat 41280 update gives an E90. How to reset my machine

SOURCE: need the manual for Aeg oko lavamat 74630

Dear Biyo,

Please download the manual from here. (simply press left click)

http://www.manualshark.org/manualshark/files/5/pdf_10516.pdf

I have sent you an email as well.

Regards,
EngineerGR

SOURCE: AEG OKO LAVAMAT 86741 UPDATE. WASHING MACHINE

I have washing machine AEG 62800 model.
When I tried to start a washing the error E60 was displayed on screen.
The following actions were done:
1. Turning knob to right to first position "COTTON LINES 95"
2. Pressing on all 5 functions except START button (Rinse Hold, Rinse+, Time Saver, Pre Wash, Stain).
Red lights will flash .
3. Pressing on Start button and simultaneously starting to turn clockwise till OFF position.
It will reset error and will release machine.

I'm hoping it will help.

Boris.

SOURCE: AEG oko-lavamat 72630 update

It is a communication problem between the circuit boards inside the machine. It might be as simple as unplugging and replacing the wires, or you may indeed require a new circuit board.

SOURCE: AEG OKO Lavamat Update washing machine LAVALOGIC 1600

Hello,
This error code (C3) means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

Good Luck!!

SOURCE: AEG Oko-Lavamat 86820 Update Error code C9

Hello. I got error code C9 on a LAVAMAT 86800. It pumped in water, and it pumps out water. You can select pump in or out....But the motor dont turn. It will not sentrifuge. So I bought new carbon brush'es on the net. One of them were totally wore down. Now it works. They lasted for 10 years.