There is a very small connection pin under each button.
If they don't make contact information will not work on remote. You can check this by very carefully opening the remote. Don't open all the way just enough to see if the buttons are lined up. Take a flashlight and magnifying glass and look to see if they are all lined up when you push the remote. If they are not you will be able to see no contact. Take a toothpick and very gently Aline the pins.
If you touch them to hard they will break and your remote will be toast.
Walld"
SOURCE: i have the viper 5900 installed in my 05 mustang.
replace the remote battery and reprogram the remote the problem on that kind of remotes is that the battery goes down quickly.
SOURCE: viper remote stopped working 791xv
I have the same remote and it comes disconnected in the battery section from the battery hitting it and then the commands and speaker stop working
as shown here
SOURCE: my remote starter for my viper 5900 2 way trans
Try reprogramming the remote. Open the door, turn ignition on, press and release valet switch one time, then press and hold valet switch while pressing lock button on remote.You should hear a confirmation chirp from the alarm. Release both buttons.Turn off ignition. test.
SOURCE: replaced truck battery and now remote doesnt work
Hello my name is Israel and I will be able to help you. First I will need for you to look for the alarm unit. The model you are giving me is for the remote not the alarm. Once you have this information, let me know and I will send you the instructions for programing the remote to the unit.
464 views
Usually answered in minutes!
×