Error 2 super general washing machine

raj somaiya

• 2272 Answers
• Posted on Aug 11, 2010

SOURCE: Samsung washing machine shows error "LE"

This is usually a communication error, unplug the machine for 20 minutes and then see if it returns when power is restored.
but if this does not helps then the actual reason of LE error code is as follows:--


LE LOCKED MOTOR ERROR

• The connector (3-pin, male, white) in the MOTOR HARNESS is not connected to the connector (3-pin, female, white) of STATOR ASSEMBLY.

• The electric contact between the connectors (3-pin, male, white) in the MOTOR HARNESS and 4-pin, female, white connector in the MAIN PWB ASSEMBLY is bad or unstable.

• The MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is cut (open circuited).

• The hall sensor is out of order/defective.


The hall sensor seems to be part of the motor.
The 'LE' error message indicates the control board has detected that the motor is either not turning, or has locked up for some reason. Monitoring the motor is the job of the hall effect sensor board which constantly determines the direction and speed of the motor and feeds that information back to the control board. If there is a problem between what the motor should be doing and what the hall effect sensor says the motor is doing, the 'LE' will be displayed and the cycle will be stopped.

Motor lock can be caused by several things from a loose connector, to a bad motor, or even the hall effect sensor failing or dislodging from it's mount. Any one or more of these components could have caused this error.


You can get required parts from www.repairclinic.com

Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

SOURCE: dwd f1011 washing machine, error codes E2&E9, machine not working

the E9 error code problem could be with door switch wiring, the door switch or the control board.but E2 problem occurs when a button is pressed for more than 30 seconds.Check for any such button else the problem is surely with the control board.

Barry Coates

• 3463 Answers
• Posted on Jan 13, 2009

SOURCE: Ariston Front Loading Washing Machine error code F07

Error code F07 is indicating that the heater relay is stuck for one reason or another.
This could be a board problem, as this where the relay is located.
However, it would be worth checking that the heater is o/k before you do anything else., as this possibly could cause the relay to malfunction.
Plz rate my solution.
Thanks.

SOURCE: E2 error on homemaker washing machine.

I have an E2 error on the display of a homemaker washing machine model no HMWM8000. It will not pump out. The PCB does not have any visibly damaged components, which part is faulty, and how do i test a water level sensor.

SOURCE: error code F 21

I have a Bosch Classixx 6 1200 express washing machine showing error code F21 on the display, what is it?