Error c eee3 - Office Equipment & Supplies

https://support.microsoft.com/en-us/windows/change-the-size-of-text-in-windows-1d5830c3-eee3-8eaa-836b-abcc37d99b9a
https://support.microsoft.com/en-us/windows/make-text-and-apps-bigger-c3095a80-6edd-4779-9282-623c4d721d64

Try reboot the machine or try trouble reset.CEEE3 is engine section undefined malfuction.Check the PRCB connections.

Print Controller board is bad. Replace it, might want a tech come out see if flashing the firmware might work

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

model number would help

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Engine section undefined malfunction.Check the printer control board connectors.Try to reset : Turn OFF,press and keep pressed the Utility key and turn ON,kepp pressed Utility and wait while Trouble reset message appeire on scren,release the key,touch the message,turn OFF afetr 1 minute turn ON.

List of Error Codes for Precor Fitness Equipment

• Precor has standardized their error code messages across all their equipment so that each error will have the same meaning regardless of what model or equipment type the message appears
• Here we list each error so that you can click through the specific error for additional details about the cause and action to correct the error
  • E2, Lift Error
  • E4, Incomplete Initialization
  • ERR, EEPROM Problem
  • Error 00, Memory, RAM, EEPROM Test Error
  • Error 01, Memory, RAM, EEPROM Test Error
  • Error 02, Memory, RAM, EEPROM Test Error
  • Error 03, Memory, RAM, EEPROM Test Error
  • Error 04, Memory, RAM, EEPROM Test Error
  • Error 05, Key Depressed at Power Up
  • Error 09, Lower PCA Memory Test Error
  • Error 10, Line Frequency out of Acceptable Range
  • Error 11, Watchdog (Upper PCA)
  • Error 12, Watchdog (Lower PCA)
  • Error 13, Fan at Incorrect Speed
  • Error 14, Fan Fail
  • Error 15, AC Input Voltage Too High
  • Error 16, AC Input Voltage Too Low
  • Error 20, Too Many Maximum Power Request in 1 Second
  • Error 21, Too Many Maximum Consecutive Power Requests
  • Error 22, No Motor Pulses at Start Up
  • Error 23, Motor Pulses Missing after Start Up
  • Error 24, Reduce Speed Requested, Speed is not Reducing
  • Error 25, Motor Pulse Count over Acceptable Limit
  • Error 26, Motor Pulse Width Incorrect
  • Error 27, Too Much Drive Motor Current
  • Error 28, Temperature Too High
  • Error 29, Excessive AC Input Current
  • Error 30, 31, 32 and 33, Communications Error
  • Error 37, E-Stop Not Working
  • Error 40, No Lift Motion Detected
  • Error 41, Lift has not Responded in Acceptable Time
  • Error 42, Lift Position Value Out of Range
  • Error 43, Zero Switch not Found
  • Error 44, Un-commanded Lift Motion
  • Error 45, Lift Moving in Wrong Direction
  • Error 46, Low Battery Voltage (AMT12 Only)
  • Error 50, Too Much Brake (Magnet) Current
  • Error 53, Can't Read Target, Can't Find Home Switch
  • Error 54, Target Pulses Lost During Operation
  • Error 55, Brake Home Switch Activated Unexpectedly
  • Error 60 or "Temporarily Out of Order", Auto Stop Not Working (TRM Treadmills)
  • Error 61 or "Temporarily Out of Order, Auto Stop Not Present" (TRM Treadmills)
  • Error 62, Vertical Sensor Failure (AMT12 Only)
  • Error LS, Speed Sensor Signal Missing
  • Error 70, LPCA Not Read
  • Error 71, Blank LPCA
  • Error 72, AMT LPCA Version Unknown
  • Error 73, AMT LPCA Record Bad
  • Error 74, Refurbished Head
  • Error 75, Refurbished Head
  • Error 76, AMT Head Stride Count Less than the LPCA
  • Error 77, AMT UPCA Stride Count Greater than the LPCA
  • Error 78, AMT Belt Replacement Warning
  • Error 79, AMT Belt Replacement Required

Error Code List for Precor Fitness Equipment

IE ERROR, INLET VALVE ERROR

OE ERROR, DRAIN ERROR

FE ERROR, OVER FLOW ERROR

PE ERROR, PRESSURE SENSOR ERROR

dE ERROR, DOOR OPEN ERROR

tE ERROR, HEATING ERROR

LE ERROR, LOCKED MOTOR ERROR

bE ball sensor error code

EE defective EEPROM

bs2--vibration sensor check

INLET VALVE ERROR

DRAIN ERROR

CL Flashing, Child Lock

PF Error, Power Failure

CE Error: Communication Error

UE Error: Imbalance Error

E000 fixing overheating
E001 fixing assembly overheating
E002 fixing assembly low temperature
E003 post-standby fixing low temperature
E007 fixing film rotation error
E010 main motor rotation error
E014 fixing motor rotation error
E019 waste toner case full, waste toner case full sensor error
E020 toner clogging between sub hopper and developing assembly
E024 developing assembly connector disconnection
E025 hopper motor, bottle motor error
E032 NE controller counter error
E064 power supply voltage error (high-voltage)
E100 BD interval error
E110 scanner motor error
E191 communication error for high voltage power supply
E202 CIS home position detection error
E225 CIS light intensity error
E227 reader unit power supply error
E248 backup memory error
E261 zero-cross signal error
E315 image data error
E400 feeder communication error
E490 wrong DF type
E500 finisher communication error
E503 finisher internal communication error
E505 finisher backup memory error
E514 stack delivery/trailing edge assist motor error
E519 gear change motor error
E520 off-set motor error
E530 rear alignment error
E531 stapling error
E532 stapler shift error
E535 swing error
E537 front alignment error
E540 stack tray ascent error/upper tray ascent error
E542 lower tray ascent error
E577 paddle error
E584 shutter error
E590 punching error
E591 puncher dust sensor error
E592 punch horizontal registration sensor error
E593 punch shift error
E5F0 saddle paper positioning error
E5F1 saddle paper folding error
E5F2 saddle guide error
E5F3 saddle alignment error
E5F4 saddle rear stapling error
E5F5 saddle front stapling error
E5F6 saddle butting error
E5F8 saddle connector error
E5F9 saddle switch error
E602 hard disk error
E604 image memory error/shortage
E609 hard disk error
E610 herd disk coding key fault
E674 fax board communication error
E710 IPC initialization error
E711 IPC communication error
E716 communication error for pedestal/ communication error for 3-way unitA1
E717 communication error for NE controller
E719 coin vendor error
E730 PDL software error
E732 scanner communication error
E733 printer communication error
E740 Ether board error
E743 DDI communication error
E744 language file/boot ROM error
E745 TokenRing board error
E746 accessories board wrong model error
E748 controller board and SDRAM size mismatch
E805 fan error

To reset the malfunction code press follow keys:
Turn OFF the copier,press and hold pressed the Utility key and turn ON the copier.Wait will apaire the Trouble reset message on the display and release the Utility key.Touch the message and turn OFF the copier.Wait 1 minutes and turn ON.Good luck.