I have a Panasonic NV-GS40B dv mini camcorder. The current installation disk does not meet my win8.1. I have tried Panasonic support but no luck. I have tried other web recommendations but they have never worked. Although I have the GS40B model, I believe the GS50 will work as well.
Sometimes if you let the win8 os do the search for you it finds the driver
switch the camera off and plug the lead into the camera and pc
switch on the camera and it should show a notice of plug and ply installed
then it will say searching for driver
if it finds one it will automatically install it through the windows wizard --just follow the prompts
SOURCE: Connect Panasonic NV-DS27B Mini DV Digital Camcorder To PC ?
If you want to do the job properly for fully remote video editing, etc then you need a digital video capture card fitting into your PC and a firewire lead that suits your particular camera.
If it helps then I have the very thing for sale if your'e quick!!!
Martin :o)
SOURCE: vista driver
need panasonic usb pv-gs65 drivers cant fine any where dose now where to get it have copy email to me [email protected]
SOURCE: how can i change my panasonic nv-gs230 mini dv
Best
1. Copy the video to your computer with WinDV. No "capturing" involved. The video resolution and PAL/NTSC format will be the same as the source.
2. Then convert to whatever format you like.
You could also use something that copy and converts the video directly from the DV, like convert to dvd with Ulead DVD Workshop.
DV is a fixed standard and comes in 50Hz and 60Hz versions.
50Hz ("PAL" 625/50) 720x576, 25fps interlace (aka 576i)
4:2:0 components, 25Mb/s Video Rate
LPCM audio 2ch 16bit 48KHz or 4ch 12bit 32kHz
60Hz ("NTSC" 525/60) 720x480, 29.97fps interlace (aka 480i)
4:1:1 components, 25Mb/s Video Rate
LPCM audio 2ch 16bit 48KHz or 4ch 12bit 32kHz
Meaning, You cannot change the camera. It is either a pal camera or a ntsc camera. Othewise you will have to by a firmware update from the manufacture's website.
221 views
Usually answered in minutes!
×