There are a number of causes....but most of the time something in he speaker section is shorted. Turn off the stereo...Remove all connected speakers from the back...turn it back on. Is the error message still there? If so its internal...if not turn off again and attach one speaker at a time, turning the stereo off to add each speaker. until error. You could have a shorted speaker or wire or too many speakers.
I've done those steps. Without wires attached, the stereo turns on without the overload message. When I attached one speaker and turned it on, it didn't have overload message. I thought eureka, I found the speaker. The next time I turned the stereo on, without the right speaker wire attached, the left speaker was the culprit. My current fix is to remove all speaker wires, turn it on, attach the wires.
×
324 views
Usually answered in minutes!
×