SOURCE: develop ineo 161
open then close the front door -> the display show " CHANGE DRUM ? YES/NO " -> press yes on the board
SOURCE: reset drum copier develop ineo 161
1 Press the [Utility] key three times.
“USER MANAGEMENT” appears.
2 Press the [Yes] key.
"CHANGE D/C" appears
3 Press the [Yes] key.
Your done.
SOURCE: DEVELOP INEO 5501 PRINTER PROBLEM CALL
you better browse the below site,
www.develop.de/en/news_archive/0__news-archiv.htmThe problem is that, up to now, the cost of printing or copying monochrome .... A new colour printer launched by DEVELOP, the ineo+ 31P, is specifically designed for ... finishing functions - all characteristics of the new ineo+ 5501. ...
ineo Remote Care - Developwww.develop.de/en/products/.../65__produkte-detail.htmineo Remote Care: Maximum support, maximum benefit - via remote diagnosis ...
SOURCE: develop ineo 501
To reset the error code turn OFF the copier.Press and keep pressed the Utility key and turn ON copier.Keep pressed the Utility key when on display appears Trouble reset message.Touch the message and turn OFF the copier.Wait 1 minute and turn ON.
264 views
Usually answered in minutes!
×