What does e16 mean please? - Hoover Washing Machines

OK Anthony! Now you have enough money to FIX the machine! LOL. First One error begets another. So forget about the errors! You are focusing on them too much! You told yourself whats wrong with this machine! OK Give Up? It is Not Draining! It is your Drain Pump Lad! Go and buy a new one, replace but remember to unplug it first. Don\'t due all that other stuff. Run the machine afterwards on a short cycle and guess what? No water!

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

Hi from retired Englishman in SW France,

If it is an Optima with a brushless motor (I only have those fault codes for Hoover), 'E16' means 'water heater element insulation fault'. Sorry ;-0(

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Error E16 mean commonly you cartridge must be reset (something Runout), press for 5-15 second for reseting each of cartriedge.

E16 is for an "open circuit" on the heater.

Where in the program is this happening?

It means that you don't have original ink cartriges and the printer can't determine the level of ink. Hold the ok button (the one in the lower right corner) until it overrides the error, and soon it will start printing, disregarding the level of ink.

Hi there.
E16 Error code means (on all canon compacts) that there is something wrong with the lens mechanism and it cannot contract/extract/focus etc. Basically, if the problem is not fixed by removing the batteries for 20 minutes and reinstalling them (make sure they are fully charged) then you'll have to take it into a shop or get a friend who knows a lot about this stuff to take it apart.

Good luck and thanks for using FixYa!!

try this PRESS STOP BUTTON FOR 5 SEC CAN FIX THIS PROBLEM

after that will adicated light alarm blinking them you can print if can't try turn off printer and turn on again.

press stop reset button for few seconds and you can use your black cartridge for printing,but do remember to put use black only setting in ur printer cartridge settings.