I want to adjust my LG remote control to my Sony tv

not going to work. That remote is for a DVD, and not reprogrammable.

this is your Sony Remote

Used General Replacement Remote Control For Sony KV ...

www.amazon.ca > Replacement-KV-32S40-KV-32S42-...

Used General Replacement Remote Control For Sony KV-32S4 KV-32S40 KV-32S42 KP-V46S55 KP-XBR48 Plamsma LCD LED HDTV TV television: ...

user manual Sony KV 32 FS120 / Sony KV 36 FS 120 - http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000062178.pdf

Hello
To access all parameters of your Sony TV, you must have its original remote control. If you haven't one, get it from Sony authorised service center. The number of remote control for KV-32FS120 is [ RM-Y195].
OK.

when you have one with the functions you need,it mostly wil work

I had the same problem with a Sony Trinitron KV-32FS320 32" TV. I reset the remote to factory default.

• Press and hold STB
• While holding STB, press OK
• Release both keys, wait for device keys to blink twice
• Press 9-0-0. The STB key will blink three times

Then I reprogrammed the TV control.

• Turn your television on
• Press STB to enter Set Top Box mode
• Press and hold TV
• While holding TV, press OK
• Release both keys, wait for device keys to blink twice
• Press 1-1-2-7. This is one of the Sony TV codes

After this, the volume + and - worked to control the TV.

• Program any other devices, such as DVD using procedure similar to above.

I hope this works for you.

On the remote control press the "Screen Mode" button to cycle through all available screen modes.

I found the DVD LG DVS-8575N manual in spanish on http://safemanuals.com/user-guide-instructions-owner-manual/LG/DVS-8575N-_S

Procedure:
Press at the same time POWER TV and a code number.

TV - Code number

LG / Goldstar: 1 or 2
Zenith: 1, 3 or 4
Samsung: 6 or 7
Sony: 8 or 9
Hitachi: 4

gemni3 quick 50 codes for samsung tv

Assuming you have not shot your in-laws and are now reading this from a jail cell, if you hold down 'TV POWER' and press number '8' or '9' on the remote, you should get it working again. I've just got a new Sharp bells'n'whistles TV, and the remote doesn't work fot it at all. Bummer!!!

I have a Zenith universal remote that i want to program to a sony 27 inch Trinitron, what are the codes?