First replace the drum, then clear the counter, machine works off the counter, clearing the counter without a new drum will have the machine set voltages to certain assembly according to what a new drums needs when in fact it is old causing image problems. to reset go to service mode stop 0 stop 01
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
SOURCE: in minolta 1054 there is a sign like box and
Have you adde toner resently??? It is one or two things either add toner or empty out the waste toner...
SOURCE: I want minolta ep 1054 simulation code,please help
I think you are looking to get to service mode. The switch is on the back of the copier > you will have to take the back pannel off. The dervice switch looks like a small Black botton > it is on the main control PCB.... press it once and make sure the doors are closed and then go to the reset mode and you are good to go.
182 views
Usually answered in minutes!
×