Getting lines on copys and scans

Recommend you buy a OEM cartridge cyan

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If you are using the ADF ( automatic document feed ) for your copies, raise the scanner cover and clean the strip window to the left of the main platen. If you are using the platen for copies and getting lines where scans are clean - you have a physical issue and it should be checked out by a technician.

Print quality is good, b&w copy is good. When i make a color copy the machine makes blue lines or bink lines. This is a brand new c452.Scan to PC is ok, print its ok only copy. Lines are vertical.

Clean the slit glass under the document feeder. Lift the feeder and find the thin piece of glass on either the left or right side and give it a good cleaning - you marks will likely go away.



Here is a how-to for removing lines from Sharp copiers.

How To Remove Lines from copies prints on Sharp copier

clean the scan glass,it's usually a .5 to1 inch strip of glass that the paper runs over while it is scanned and it probably has white out or something similar on it

using PRT screen and menu find clen function and try if this feature will fix the issuw.
Change the cartridge if no results.

Hi,
could u plzz be more specific abt the line in the paper, i wish to know do u have the same issues if you are printing from the computer as well.

Try the following steps...

1) open the lid of the printer and clean the scanner glass

2) scan a document to the computer and check if you are getting the line even on the scanned image, if yes then its an issue with the printer

Although you didn't specify the scanner model, this solution should work.

If the scanner has a top feeder, open it.

You will see a thin strip of glass, either to the left, or right of the large scanner glass.

There is most likely a small spec of ink, white out, etc on it.

Clean the strip glass with rubbing alcohol and the line should go away.

with Brother -photo capture-copy-fax-scan machine, I can do except scanning. Please show me how to enable scanning

Does this help? You obviously have to insert the media type into the media slot on the far right.(omoademola) Using the top control panel Printing tasks Scanning/Copying/Faxing tasks Troubleshooting
The top control panel lets you print an image from a photo card, scan a document or image, and copy a document or image with the press of a button.
Button/Light: Function: 1 Power : Turns the All-In-One on or off. 2 Copy: light Illuminates when Copy Mode is selected. 3 Mode: Changes the copy, scan, or photo card mode. 4 Scan: light Illuminates when Scan Mode is selected. 5 Photo Card: light Illuminates when Photo Card Mode is selected. 6 Rotate: Rotates the image 90 degrees. 7 LCD Panel: Number of Copies- this changes the copy count. Note: This feature is not active in Scan Mode. 8 Display: Shows copy, scan, and photo card selections. 9 Resize: Enlarges or reduces the size of the image. 10 Page Preview: Shows a preview of the output. 11 Select: Secures an option. 12 Menu: Provides options for image. 13 Arrow : Scrolls left, right, up, or down. 14 Stop/Clear: Cancels a print job or clears a selection. 15 Color Start: Initiates color copy, scan, or photo card output. 16 Black Start: Initiates black copy, scan, or photo card output.