<!-- from fixya rte -->Access the fleet doesn't work - Ubisoft Assassins Creed IV: Black Flag

Usually pressing "go" works

Fleet Sync is applied to signaling format for data communication. Various functions associated with fleet sync can be configured in Edit Menu.

It is water resistant

The fuse panel diagrams are in the owners manual, you can access a PDF copy of the owners manual at the Ford fleet site at the link below, it is free.

https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Take it in to a place like Fleet farm or Farm and Fleet and they will do a brake diagnostic for you for free. ( well , our local stores do it for free...)
You could be getting a little brake pad hang up due to a lack of lubricant on some major brake componants. Thats what it sounds like to me...

I'd also suggest you check the trunk and make sure there no loose items rolling around...
The forgotten bottle of wine from that random evening out can make some wierd noises when you've forgotten its there.

Firstly be very careful working with electricity.
Try plugging a lamp or similar into the outlet to see if it has power.
If it does sounds like it then has internal problems.
Most older appliances cost more to repair than they are worth. I suggest time to upgrade.

Visit fleet.ford.com owners_manuals for access to the 2004 Expedition Owners Manual.

Hope help with this (remember rated this). Gooc luck.

I drive a 2008 Suburban LT and my company has a true work "fleet" suburban. The only difference between these two that I have is the back of the fleet vehicle has a thick rubber mat in the back with no seats. After removing the black mat I found that the channels and rods that the rear seats clip into are present. The third row seats are installed by clipping them in no bolts or tools are required.