Bosch logiechoxx8 shows F:57 - Bosch Nexxt Premium WFMC6400UC Front Load Washer

If there is an f57 error code, in 80% of cases the problem is related to the motor control board. But do not rush to buy a new one for your Bosch washing machine. When you solder the components of the board, they may be damaged as a result of the strong vibrations of the machine. Therefore, you need to monitor the correct and stable installation of your washer. In many cases, an experienced master can bring the device back to life. It will significantly save your budget. Think before you start an independent repair. Remember that the new electronic unit is quite expensive.

19.
Be sure to show your work.

not much can be done if the dealer will not warrant the chuck
if the bosch name appears on the chuck, call bosch direct and make a complaint but if it doesn't then get a new and better quality chuck and replace the chuck on the drill
remember that ordinary key operated 3 jaw chucks are not designed to used in a hammer operation continuously as that damages the screw mechanism of the chuck especially if the drill bit is over 5/16 drill size
if that is your operation, invest in a special masonry drill such as ramset or hilti or other makes of that sort

Beko Washing Machine ' WMA Series ' Error Codes

www.ukwhitegoods.co.uk/.../fault-codes/...fault-codes/3623-beko-wma-...
Feb 6, 2013 - ... Fault Codes. Beko WMA Washing Machines With Display ... BekoWMA Series Washing Machine Fault Codes. These fault codes are ... E18 ...

UK Whitegoods • View topic - Beko WME7247W showing error code e18 ...

www.ukwhitegoods.co.uk/.../washing-machine.../beko-wme7247w-show...
Jun 19, 2011 - Hi, does anyone know what error code e18 is on a beko wme7247wwashing machine? thanks. User avatar louisebaxter: Whitegoods Newbie Beko wme7247w dc module burnt out
Apr 27, 2014
Bosch WAS24460GB showing error F:57
Sep 28, 2013
beko washer error code
Aug 18, 2012
Samsung B1415J showing error code EA ...
Jan 9, 2012
More results from www.ukwhitegoods.co.uk

None that I can find. All are .375" low profile, 57 drive links, Gauge of .043". I have only seen .375" (3/8") LP with semi chisel style cutters.

display error code F 57

Thanks, that perfectly nailed my problem. Bad / burnt solder joint on a SHX45P05UC/57 model. A little solder, and it may last a while. But next it fails that way I can order the motherboard without even opening it up.

1 drain pump propeller clogged or hose clogged.disconnect hose under sink and drain then will tell.

Looks like the heater has failed.Contact Bosch direct to repair as it has a 2 year guarantee