How can you mark the exact location of where your electrical plug is going to meet drywall.
If you have the outlet boxes on the studs with no outlets installed yet, this is what I do. Get red lip stick and rub it on the edges of the outlet box. Position the dry wall against it and press firmly. You now have a perfect mark on the backside where to cut out. this is the fastest and most accurate way to do it.
You can either measure up from the floor or the piece of drywall you just hang and then measure over from the wall or the piece of drywall you just hang or you can put the drywall in place and I ball behind it and Mark with a pencil and then cut it out with a dremel tool and you should be good from there. You might want to use a keyhole saw or a roto zip and a Rotozip is the best way to do it but it takes a little practice in order to control it
1,282 views
Usually answered in minutes!
×