What is Technical F53 alarm a - Miele Washing Machines

help in the link. One article says it is a $1,000 repair and if that is the case, you call for service so you get the correct diagnosis and warranty.

https://www.google.com/search?q=Miele+washing+machine+error+F53

..

O2 sensor location F53 chassis, 1996 Ford 460? - RV.Net

https://www.rv.net > Open Roads Forum > Tech Issues
Jun 30, 2013 - The O2 sensor (only one) on you chassis is located at the end of the "Y" pipe, just in front of the resonator. It is mounted on top of the pipe.
10 posts · Posted: 06/30/13 06:55pm, Link ' Quote ' Print ' Notify Moderator. I think my O2 sensor is going ...
Class A Motorhomes: F53 oxygen sensor - RV.Net
10 posts
Apr 6, 2014
Replacing O2 sensor on Ford V10-anyone done it? - RV.Net
10 posts
Jan 10, 2014
Class A Motorhomes: Southwind V10 Oxygen Sensor ...
10 posts
Jul 14, 2009
More results from www.rv.net

https://www.google.com/search?q=2007+ford+f53+o2+sensor+location

..

Miele Washer F53 - Troubleshooting Guide

• If the F53 error code appears on your Miele washer, it signifies there is an issue with the motor that turns the drum. ...
• Try unplugging the washer from the wall, plugging it back in, and put it on sanitize.

More items...

Miele Washer F53 - Troubleshooting Guide - HowToFixit.Net

Replacing the brushes videos

https://www.google.com/search?q=Miele+W3037+replace+brushes

..

Let it be. Will look so funny; indeed !!! Isn't it?

If anyone would have it a company called Helms Publishing would. I believe they are in Highland Park Michigan or Detroit Michigan.

Error code F53 on Miele is a speed sensor fault.
It has detected the drum speed to be wrong at some point and has indicated the problem to you.
Have you tried unplugging it. That will reset the computer.
If it's not coming up again after unplugging it, I'd not worry about it.
If it is coming up every time you use it, then you have either a faulty sensor, motor or pcb.
Miele are extremely secretive with information on their appliances and this makes it hard to diagnose accurately faults on them.

A call with the Miele tech helpdesk got me an answer: The tacho unit (coil) should have about 500 Ohm resistance, so they told me. My unit only had about 78 Ohm's, so I ordered a new brush unit (which includes the tacho). The new unit actually measures 250 Ohm, but since it was a new one I did fit it. It works like a charm again. No F53 fault code anymore.
The part no. is 6799642 - Module BSTV Mrt40 RK473. It cost me about 70 euro's including shipping. My machine is a type W3821, but the motor and brush unit with tacho is used on a variaty of models.
Cheers!

Is this an F350? Heading say's f53. What size engine is in this vehicle?