Ti-nspire will not pass loading screen

SOURCE: Loading Screen Freeze

1. Remove the keypad (for TI-Nspire) or the battery door (forTI-Nspire CAS) and remove at least 1 battery from each column ofbatteries. After 2-5 seconds, reinsert the batteries and turn the uniton. This will cause the unit to reboot the operating system.
2. Holddown [Home] [Enter] [P], and while holding these keys, press [On]. Thedevice will boot up as in the previous reset, but will display a menuwith the following options. Please try options 2, 3, and 4 in thatorder.
   
   1. Cancel - The most non-intrusive reset option; no changes are made, the unit restarts. 2. Delete Operating System – The operating system will be deleted without deleting any documents. 3. Delete Document Folder Contents – This will delete the user’s documents, but will not delete the OS. 4. Complete Format – This will delete the OS and all documents for a total erase of memory.
   Note: TI-Nspire family model options 2 and 4 above require that the OS be reinstalled. The reset menu will only display if the unit is off and batteries have been removed/replaced as described above.

SOURCE: I have a TI-nspire CAS

Hello,
You should ( a suggestion) reset the OS by pressing the button on the back of the unit.

If that does not work, you may consider reinstalling the OS. The procedure as described in the TI Knowledge Base is as follows.

What steps are required to reinstall the TI-Nspire family operating system?

To reload the device’s OS using a computer with TI-Nspire Computer Link:
• Connect the TI-Nspire device (with the Nspire keypad) to the computer using the USB Standard A to Mini B cable.
• Open the TI-Nspire Computer Link software. The select device dialog should appear, and detect the device.
• Either drag the OS file (available in the ‘downloads’ area at education.ti.com) onto the TI-Nspire File Browser portion of the window, or click Tools -> Install OS.
To reload the device’s OS using another TI-Nspire or TI-Nspire CAS device:
• Connect the two devices using the USB Mini A to Mini B cable. The end marked A should be inserted into the sending unit, while the end marked B should be inserted into the receiving unit.
• On the sending unit, access the document chooser by pressing [Home] [7]. Once in the document chooser, press [Menu] and choose 9:Send OS…
NOTE: Users can only send an OS to a unit of the same model. Users cannot send an OS from a TI-Nspire to a TI-Nspire CAS.
Please see the TI-Nspire guidebooks for additional information.


Hope that helps.

SOURCE: TI-Nspire 84 Plus keypad problem

Remove the TI84 Keyboard, insert the TI-Nspire keyboard and try to reset the calculator with a starightened paper clip.Calculator has a reset button on the back.

SOURCE: My calculator wont load and just keeps resetting

fujitsu sound driver

SOURCE: My ti-nspire calculator does not

Cis30-cos40=0