Blinking codes for sony bravia kdl-55hx729 - Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

SOURCE: Sony Bravia KDL-40W4500 turns off

This can indicate a problem with the high voltage circuits. Since this is a new set, it should still be under warranty. DO NOT open up the unit as that will void the warranty. Return the set or request warranty service. Note the 8 blinks when you request service as that should allow them to bring the correct replacement parts.

Keep us posted.
Dan

SOURCE: Sony Bravia KDL-40V3000 standby light blinking

I just worked on this last week 13 blinks means there is a problem with the backlights.So it can be 1 of 2 things bad inverter board( which costs less than $200) or the panel in which case you can thow the TV away as it will probably cost as much for a new TV.Unfortunately the set I worked on ended up being panel. If you try the inverter board just take your time removing it its plugged in rather tight I gently tapped it out with a screwdriver to get it started.

Rustym62
The TV Dude

SOURCE: tv bravia kdl 40v3000 problem turning on

To wayne: The balancer board is in fact available by itself. You can get it at many different parts depots here on the web. I just suffered from a similar problem, on the same tv and it solved my problem perfectly (Stupid 13 blink, blink code...)

The searchable part number is SSB400WA20. Its referred to as a voltage inverter (for the backlight of the lcd panel.)
Good luck!!!

SOURCE: slow moving image sony bravia KDL32M3000

Hello darwin_gabou, My names Dave! You have a bad A/V input board.

Part #: A-1376-788-A

Link to part: http://www.shopjimmy.com/catalog/product/view/id/169673/s/sony-a-1376-788-a-bm-board-for-kdl-32m3000/

Please feel free to contact me if you have any question. I'll be more then happy to answer any questions you may have!

Dave
503-432-9904
Premium TV Tech
www.pleasefixitdave.com
[email protected]

SOURCE: Bravia KDL-46VL130 TV: Our Sony KDL-46VL130 picture is streaking and some...

That symptom may cause by the main board or t-con board, I suggest you do software up grade first.