C 2454 Code

Shown in the video in the link

https://www.google.com/search?q=reset+button+on+a+dometic+rm+2454

..

i copied
This page is about helping people programming an RCA universal remote control with a digital converter box. First be advice that not all universal remote work with converter boxes, the one we know for a fact and this process is for is the RCA RCR503 Below are the codes and the Steps to do it.
Step 1: Manually turn on the converter box if possible if the converter box does not have ON/OFF switch is okay, go to the next step.
Step2: Press and Hold the CODE SEARCH button key until the indicator light turns on
Step 3: Release CODE SEARCH
Step4 : press and release the SAT-CBL-DTC key-
the indicator light blinks
Step 5: Find the four digit code for your particular digital converter box brand by looking at the demo below input the codoes the red light should turn off. Now your converter box should work. The two codes to try for RCA are :-2325 or 2454 hope this helps

I had to get a Rev 10 version of the Sky remote as those codes did not work and I entered in the CORRECT Blue diamond code which is 2586. this worked perfectly for me. other codes for blue diamond are: 2134, 2454, 3493, or 3500.

check the black developer motor and developer unit

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Contact Adobe customer service, they will give you the code.

usually with mitsubishi a 1 2 code is no error

call autozone or orielleys or advance and tell them that code nd they will tell you what that code means, if u got the code from a code reader that u plug into the car thru and obd 2 reader then they can tell u

email [email protected] with "avn 2454 map disc" as subject... will see if i can help you

Developing motor for the Black, working in conjunction with Toner Control Sensor.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f