I have a Samsung DLP tv and while the HDMI works fine, the component inputs no longer work properly. Component input 1 does not work at all, and Component input 2 does not display colors properly. Blue colors appear as a teal-like color and actual greens wash out into a similar color.
This tv is out of warranty and I can't afford a new tv right .now.
SOURCE: Reb bar in middle of screen when using component input
there is a problem with your ps2.have it check by a tech.good luck.
SOURCE: hdmi input
What are you attempting to use HDMI for? Sometimes you have to adjust the settings of the system that is using the HDMI connection. The tv needs to reset to HDMI
SOURCE: samsung dlp color issue
On the front of the DMD Board to the right of the fan is a sticker that says CN801. There is a small jumper there. Remove this after replacing the color wheel and it will fix the color issues.
SOURCE: DLP TV keeps flickering
Please recheck component connections in both units and make sure to hook up them according to corresponding colors like blue to blue, red to red and orange to orange.
SOURCE: Rainbow color effect appears when Samsung LCD plays Wii or DVD
Hello, I have a question which video inputs are you using for your DVD and Wii connections? The reason I ask is because this sounds like video distortion cuased by noise. If possible can you send a picture of the screen when it has this problem and send which video ports are being used? If it is noise in the video you may have a saw filter problem, or a decoupling issue. In any event I'll know more once you send those pictures and which inputs you are using for your DVD and Wii. Thank you, Shuttle83 http://www.electron-age-technologies-llc.com [email protected]
337 views
Usually answered in minutes!
×