Smart pad i can't exit the app

https://tascam.com/downloads/tascam/353/2488_1.00Messages.pdf

hi Frank.
this is what i just found on the internet.
How to watch Netflix on 2nd TV? Method 2 Smart TV

1. Determine if your TV is a Smart TV. Smart TVs connect to your home network, and can run media streaming apps such as Netflix. ...
2. Connect your Smart TV to your home network. ...
3. Open your Smart TV apps. ...
4. Select the Netflix app. ...
5. Log in with your Netflix account. ...
6. Browse using your remote.

6 Simple Ways to Watch Netflix on TV - wikiHow

https://www.wikihow.com/Watch-Netflix-on-TV Search for: How to watch Netflix on 2nd TV?

how to view NETFLIX on second TV Google Search

Yes.

Do a hard reset to this set and check. If it do not help you, contact the authorized service center for RCA. There are two types of reset to TVs. The first is simple to do; a Hard Reset; and the other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Assuming you've got a grind which brews out correctly when manually brewed.....
Fill and tamp a portafilter, ready. Press and hold 'stop' pad until machine beeps. Tap the pad you want to program. Lock in the portafilter. Press and hold the pad until you get the volume required. Press 'stop' to exit programming, the machine will stop beeping.

Have you tried starting in safe mode or connecting the hard drive to another computer as a 2nd drive and accessing it that way and trying to repair and virus check

Press MODE. Use the arrows to highlight NORMAL on the top line and press ENTER. Highlight FLOAT on the second line and press ENTER. Press 2ND [QUIT] to exit the mode screen.

If you ran the dynamic graphing application called Transfrm you will only see one graph. It takes over the graphing from the native OS.
You will recognize it by the graph style at the left of the Y1=, etc. as in picture

As you can see, only one = is highlighted, meaning only Y1 will be drawn. To recover the native Y= screen, you must unload the Transfrm App from memory.

Here is how to do it.
Exit what you are doing and go to main calculator screen.
Press the Apps button.
Scroll down to find the Transfrm App
Highlight the : before the name and press ENTER.
The screen appears as on the second screen capture above
Press 1:Uninstall
This will unload it from memory and you will be able to draw multiples graphs.

There is the possibility that the failure to draw multiple graph has nothing to do with Transfrm. In that case it is most likely due to the Stat Plots being turned ON. Turn them OFF

Press [2nd][Y=] (STAT PLOT)
Select [4:PlotsOff] and press [ENTER]

Need to set your brightness setting . Press 2nd and the up or down arrow key this should darken the curser and the display to where you can see it .

Hello,
Press [EXIT] or [2nd][QUIT] to terminate the program that may be hung in memory. Press [2nd] MEM[F3][F1][F4].
You may have to reset contrast.
1.Press and release [2nd] key.
2. Press and hold [UpArrow] to darken or press and hold [DownArrow] to lighten it.

Hope it helps.