C210 error code - Konica Minolta Bizhub C454 Color Copier

https://www.manualslib.com/products/Sharper-Image-Msg-C210-3300444.html


Sharper Image MSG C210 Manuals

the error codes are BMW specific and yes an error code would show up as a cam position sensor fault.

your error is : C210 Paper conveying motor

check paper motor remove and check clean with alcohol and than oil it

you can change it on the settings... goodluck...

Clean or change the transfer separator corona holders block.

Please specify the machine model,in the Ricoh 1035 not exist the C210 error code.
If your machine show CC201=When the paper jam condition is not reset for 10 minutes the code is automatically generated.For reset please enter in the SP mode turn main switch OFF,unplugged and wait 10 sec.Plugged and turn ON the power switch.

Cassette Feeding Module E904

The waste toner box swing cam home position sensor is faulty.

The cassette relay PCB is faulty.

Try loading letter size paper in tray1 .. Open the front door and the assembly attached to the front door is the transfer roller ASM. mybe you knocked it out of position ..There are green plastic clips that allow someone to the transfer roller unit so its easy to mess up good luck

I found software for the Mio c210 on their European site located here.

your internet provider would be better to assist you with that