I need a new blade for acme supreme juicerator model #6001

You can contact Waring at 1 800 492 7464 or just google Acme
juicer parts. Tip-Omega shredder blades are cheaper.

It's called the clutch nut. Contact Waring at
1 800 492 7464.

Contact waring directly or just google juicer parts. Believe Omega
juicers share same blade and it's cheaper. If your handy you can
sharpen you old blade by drilling, at an angle, into the face of each
burr on the blade. Use a 1/16 or 5/64 bit and do it ever so slightly.

http://www.waringproducts.com/ret/share/man/29_man.pdf

WARING AT 800 492 7464 HANDLES ACME
JUICERS. VIBRATION MAY NOT INDICATE
REPAIR. THIS JUICER DOES NOT EJECT
PULP SO IS PRONE TO VIBRATION JUST
LIKE AN INCORRECTLY LOADED WASHING
MACHINE. HOWEVER, SEVERE VIBRATION
WILL CAUSE THE BLADE TO CHEW UP THE
CHUTE. YOU WILL NEED A NEW COVER.
TALK TO WARING. ANOTHER PROBLEM
IS NEW COVER PROVIDED WILL NOT FIT
SOME OLDER JUICERS WITHOUT FILING
DOWN THE EDGE OF THE COVER. TAKES
TIME BUT CAN BE DONE.

The cutting blade can be found at http://www.waringproducts.com/ret/.  Waring now makes the juicers.  Good luck!

REMOVE THE COVER BY ROTATING AND
THE CLUTCH NUT HOLDING DOWN THE
CUTTING BLADE. EVERYTHING LIFTS OFF.
CLEAN ALL DISCOLORED PARTS BY FIRST
BOILING IN A SOLUTION OF OXI CLEAN AND
WATER, THEN SCRUB WITH A SAFE
ABRASIVE SPONGE. SHE WILL SHINE UP
NICE.

Why not just go here and print it out :)

http://www.waringproducts.com/ret/share/man/29_man.pdf

I have one . I could scan it and send it to you?

Here's the link for all manuals for Acme:
http://waringproducts.com/ret/catalog/product.php?product_id=29&cat_id=2